浏览标题索引

标题 文件
卷 78, 编号 9 (2011) Features of designing the inertial synchronizer for preselector gear box
Sharipov V., Kryuchkov V.
卷 78, 编号 12 (2011) Features of designing the reversing automatic tensioning wedge-belt drive
Khabrat N., Umerov E.
卷 82, 编号 12 (2015) Calculation features of cycle of reciprocating internal combustion engine operating on gaseous fuel
Gavrilov A., Gots A.
卷 81, 编号 5 (2014) Features of reversal seed drying in a tower dryer
Pavlov S., Golubkovich A., Marin R., Dadyko A.
卷 76, 编号 5 (2009) Osobennosti separatsii zernovoy smesi na tsilindricheskom podsevnom reshete s plastinchatym barabanom
Strikunov N., Tarasov B., Lekanov S., Pavlov S.
卷 87, 编号 4 (2020) Specifics of certification of agricultural tires with maximum consideration of their operating conditions PDF
(Rus)
Goncharenko S., Godzhaev Z., Pryadkin V., Artyomov A., Godzhaev T.
卷 76, 编号 7 (2009) Features of quality management system for plants of AПК (agroindustrial complex) technical service
Silina M.
卷 86, 编号 2 (2019) Features of the spectra of loads on the units of mobile agricultural machines in the field when delay in external influences PDF
(Rus)
Partko S., Groshev L., Sirotenko A., Vojnash S.
卷 76, 编号 10 (2009) Features of technological process of drum threshing-and-separating system for grain combine harvester
Zan'ko N.
卷 76, 编号 5 (2009) Osobennosti tovaroproizvodstva v KFKh i LPKh i sozdanie gruzovykh avtomobiley sel'skokhozyaystvennogo naznacheniya
Dzotsenidze T.
卷 79, 编号 6 (2012) Features of tailings removal with a stripping-type combine
Ayubov A., Shokarev A.
卷 83, 编号 1 (2016) Features of cold start of 6ЧН 13/11 engine and after start warming-up of engine and transmission unit of T-150K tractor PDF
(Rus)
Krokhta G.
卷 80, 编号 2 (2013) Features of motor and tractor internal combustion engines exploitation in conditions of Siberia and Far East acutely continental climate
Labarov D., Dumnov S.
卷 76, 编号 3 (2009) Peculiarities of the exploitation of mobile agriculturalmachines by the use of biodiesel fuel
Didur V., Nadykto V., Juravel' D., Yudovinskyi V.
卷 83, 编号 5 (2016) Features of operation of STA-5TM replaceable technological superstructure for application of solid mineral fertilizers based on Ural-432065 vehicle chassis PDF
(Rus)
Shkel' A., Kozlovskaya M., Dzotsenidze T.
卷 78, 编号 2 (2011) Features of the electronic control for transmission electrohydraulic units
Shipilevskiy G.
卷 79, 编号 3 (2012) Features of using diesel power stations and systems with energy storage and current limiters
Genin V., Popova M.
卷 81, 编号 8 (2014) Combines’ development: from СК-10 to TORUM-740
Shreyder Y., Gorbachev I.
卷 91, 编号 2 (2024) From the single model to the line-up. The 60th anniversary of the DT-75 tractor. The little-known modifications
Kosenko V.
卷 76, 编号 1 (2009) Branch regulation ofcreation, production and use of agricultural machinery
Krasnoschekov N., Lipkovich E.
卷 77, 编号 1 (2010) Separation of slice from soil massif by the action of share edge
Nikolayev V., Popov D.
卷 77, 编号 3 (2010) Domestic manufacturers against the repeal of agricultural machines and equipment subsidies
- -.
卷 76, 编号 10 (2009) An assessment of adequacy of model for nitric oxide formation by combustion of fuel in diesel
Kul'chitskyi A., Gots A.
卷 77, 编号 9 (2010) An assessment of amplitude-frequency characteristics of devices for «noncontact» creaming
Simdyankin A., Simdyankina Y., Lazutkina S.
卷 78, 编号 4 (2011) The assessment of vibrations of turbochargers bodies with different bearings designs
Ivanov D., Fisher A., Vazhenin K., Plekhanov D.
卷 78, 编号 7 (2011) Assessment of vibration strength of crankcase parts of the power unit
Nikishin V., Makushin A., Fattakhov D.
卷 89, 编号 4 (2022) Assessment of influence of the Common Rail system high-pressure fuel pump design on regularity of fuel supply to a fuel accumulator
Kulmanakov S., Tyutikov S.
卷 84, 编号 5 (2017) Evaluation of the effect of fuel unevenness on diesel performance PDF
(Rus)
Devyanina A.
卷 90, 编号 3 (2023) Evaluation of the influence of fuel pressure pulsation in the Common Rail system on the economic and environmental performance of a diesel engine
Kulmanakov S., Tyutikov S.
卷 84, 编号 2 (2017) DETERMINATION OF DIFFERENT METHODS OF TRACTORS DIESEL ENGINE PRE-START PREPARATION AT ITS STARTING CHARACTERISTICS PDF
(Rus)
Bondar V.
卷 81, 编号 2 (2014) Evaluation of the impact of wheel tractor velocity and other factors on its oscillations
Zolotarevskaya D.
卷 79, 编号 1 (2012) Assessing the influence of number of metal-ceramic friction disks in the brake assembly on the braking performance
Ilyuschenko A., Dmitrovich A., Bagnychev S., Karpyza S., Leshok A.
卷 81, 编号 9 (2014) Estimation of soil compaction by ВТ-150 tractor equipped with different types of caterpillars
Revenko V., Kupryunin D., Beynenson V., Fedotkin R., Bely I., Veselov N., Zverev N.
卷 89, 编号 3 (2022) Evaluation of the possibility of using artificial neural networks for self-diagnosis of an internal combustion engine with cylinder deactivation PDF
(Rus)
Khimchenko A., Mishchenko N., Savchuk O.
卷 78, 编号 7 (2011) Kriging method in the assessment of clods' presence on soil surface after the moldboard ploughing
Maksimov I., Malov A., Maksimov V., Kudryashov A.
卷 77, 编号 4 (2010) An assessment of dynamic factor of metal construction of boom for hydraulic loading manipulators by lifting load from its base
Gerasun V., Konyushkov A.
卷 82, 编号 7 (2015) Evaluation of durability of welded joints of agricultural machinery metal structures based on accelerated testing
Yerofeyev V., Ignatyev A., Sharafiyev R.
卷 78, 编号 9 (2011) Assessment of smoke opacity and toxicity of tractor diesel engine while working on rapeseed oil
Kartashevich A., Tovstyka V., Plotnikov S.
卷 80, 编号 6 (2013) Performance estimation of a straw-chopping unit of combine harvester
Yagelskiy M., Rodimtsev S.
卷 81, 编号 7 (2014) Estimation of fuel quality indices based on the investigation of its tribochemical processes and properties
Kerimov M., Safiullin R., Marusin A.
卷 79, 编号 5 (2012) Evaluation of elastic shaft dumping ratio for the research of dynamic processes in transmission
Chuprynin Y., Kotov A.
卷 79, 编号 7 (2012) Estimation of mass and dimensions indices of the embedded electromechanical systems of agricultural purpose
Litvin V., Safonov A.
卷 77, 编号 4 (2010) Evaluation of engine workload by tractor use
Janulevičius A., Juostas A., Pupinis G.
卷 78, 编号 5 (2011) Evaluation of sowing machines' reliability according to the operating efficiency index
Yakovlev N.
卷 77, 编号 11 (2010) Assessment of stress-strain state of the rubber-metal joint rubber element for caterpillar mover during the assembly and torsion
Korosteliov S.
卷 80, 编号 5 (2013) Assessment of bearing and coupling passability of chemicalization vehicles on grounds of low bearing value
Pryadkin V.
卷 82, 编号 6 (2015) Evaluation of remaining operating life of oil depots equipment in agroindustrial complex by results of technical condition diagnostics
Yerofeyev V., Ignatyev A., Yerofeyev S., Sharafiyev R.
卷 80, 编号 4 (2013) Parameters estimation of transport headlights of tractors and self-propelled agricultural machines
Nikolayev Y., Sayapin S.
卷 82, 编号 2 (2015) Assessment of white lupine grain damage during harvesting
Aldoshin N., Zolotov A., Tsygutkin A., Aladyev N., Malla B., Suleyev V., Kuznetsov A.
卷 76, 编号 5 (2009) Otsenka podveski traktora po ee amplitudno-chastotnoy kharakteristike
Zhdanovich C., Gerashchenko V., Burnosenko A.
卷 81, 编号 6 (2014) Assessment of limiting state of working organs of soil-cultivating cutters
Zvolinskiy V., Nikolayenko N.
卷 79, 编号 11 (2012) Vibration and noise estimation of applicability of the ЧВГ-35 vermicular graphite iron
Nikishin V., Svetlichny K.
卷 78, 编号 12 (2011) Evaluating the design and manufacture of tribounits
Kochenov V., Nikitin Y., Cheremokhina I., Chicherova T.
卷 84, 编号 7 (2017) Evaluation of design and production of ICE PDF
(Rus)
Kochenov V., Sakharov A., Kazakov S., Zhamalov R., Goeva V., Grishin N., Grunin K.
卷 86, 编号 4 (2019) Performance assessment of motor oils by the wetting angle PDF
(Rus)
Vahrushev V., CHerepahin S.
卷 76, 编号 9 (2009) An assessment of load distribution by means of metal coats
Tyutrin S.
卷 86, 编号 3 (2019) Evaluation of the impact of technological processes PDF
(Rus)
Rudenko N., Kulaev E., Rudenko V., Nosov I.
卷 88, 编号 5 (2021) Evaluation of the offset of the angular scale to improve the control accuracy of the single-cylinder engine PDF
(Rus)
Abramov P.
卷 83, 编号 8 (2016) Assessment of model adequacy of the process of grain impurities separation from the fraction of light waste in settling chamber to experimental results PDF
(Rus)
Saitov V., Suvorov A.
卷 88, 编号 1 (2021) Evaluation of methods for experimental and analytical determination of the contour area of the contact patch of a pneumatic tire with a support base PDF
(Rus)
PDF
(Eng)
Lipkan' A., Panasyuk A., Godzhayev Z., Lavrov A., Rusanov A., Kazakova V.
卷 82, 编号 2 (2015) Evaluation of statistical characteristics of flow of grain pile entering in dryer
Andrianov N., Nikolayenok A., Manasyan S., Manasyan G., Mei S., Li Z.
卷 80, 编号 7 (2013) Estimating the effect of rotary table feeder working organs’ parameters on its performance
Yermolin A.
卷 81, 编号 5 (2014) Estimation of tractor life cycle cost
Arkhipov V.
卷 78, 编号 6 (2011) Evaluation of technical state of the cylinder-piston group by the crankcase gases consumption
Filippova Y., Nikolayev Y.
卷 86, 编号 3 (2019) Evaluation of the technical level of the agricultural tractor TK-3-180 when it is included in the robotic complex PDF
(Rus)
Lavrov A., Zubina V., SHevcov V., Godzhaev T., Vyaznikov M.
卷 87, 编号 3 (2020) Estimation of fuel efficiency of automobile and tractor diesel engines, operating with the shutdown of part of the cylinders PDF
(Rus)
Gots A., Guskov V., Fomin V.
卷 89, 编号 1 (2022) Assessment of the compaction effect and operational characteristics of a crawler tractor based on a rheological approach PDF
(Rus)
Nosov S., Рeregudov N.
卷 81, 编号 7 (2014) Estimation of utilization level of grain combines’ performance
Yerokhin G., Reshetov A., Konovskiy V.
卷 77, 编号 7 (2010) Assessment of radioactivity protection of irradiated machine's operator by the method of circular diagrams
Gusev S.
卷 79, 编号 12 (2012) Performance assessment of a sustained power engine under probabilistic nature of external factors, based on the «maximum of effective power» criterion
Eviyev V., Ochirov N., Mudzhikov B.
卷 76, 编号 5 (2009) Otsenka ustoychivosti funktsionirovaniya razomknutoy pnevmosistemy
Sychugov Y., Skorobogatykh V.
卷 78, 编号 6 (2011) Evaluation of functional quality of tractor cab local ventilation in the warm season
Mikhaylov V., Sharipova N.
卷 79, 编号 10 (2012) Evaluation of the functional characteristics of local air cooler in tractor’s cab
Mikhaylov V., Sharipova N.
卷 82, 编号 8 (2015) Assessment of environmental friendliness of tractors, machinery and equipment
Trembovelskiy L., Griff M.
卷 81, 编号 10 (2014) Assessment of performance characteristics of second generation adaptive friction clutches
Shishkarev M., Tran V.
卷 76, 编号 11 (2009) An assessment of energy consumption of the mill with flat and helicoid blades for broadcast tillage
Belov M., Gadzhiyev P., Koval K.
卷 83, 编号 7 (2016) Efficiency evaluation of machine and tractor fleet based on multipurpose power vehicles with sets of replaceable modules in conditions of the South of Russia PDF
(Rus)
Bur'yanov A., Dmitrenko A., Goryachev Y.
卷 83, 编号 2 (2016) Estimation of use efficiency of automatic transmission of «torque converter - coupling - gearbox» type PDF
(Rus)
Kotiyev G., Vasilyev V., Gorbatovskiy A.
卷 79, 编号 8 (2012) Evaluation of effectiveness of the wood chips production in timber terminal
Seliverstov A., Gerasimov Y., Sukhanov Y., Syuniov V., Katarov V.
卷 92, 编号 1 (2025) Evaluation of the combine harvester’s thresher efficiency by grain losses at operating conditions
Chaplygin M., Zhalnin E., Aldoshin N.
卷 88, 编号 1 (2021) Evaluation of the efficiency of transport services for forage harvesters when harvesting maize for silage in Novosibirsk region PDF
(Rus)
Galimov R., Maksimovich K., Tikhonovskiy V., Voynash S.
卷 81, 编号 10 (2014) Efficiency estimation of mechanic regulators of high-pressure fuel injection pumps
Shiriyazdanov R., Khaliullin F.
卷 78, 编号 1 (2011) Assessment of the efficiency of combine harvesters' technical diagnosis
Zyabirov I., Zyabirova V.
卷 80, 编号 11 (2013) Performance assessment of machine–soil–plant system
Maksimov I., Maksimov V., Mikhaylov A., Alekseyev V.
卷 79, 编号 7 (2012) Estimated indices of electrical-discharge machining at reinforcement and parts reclamation: drift speed of charged particles
Pavlov V., Kolomeychenko A., Kuznetsov I.
卷 89, 编号 1 (2022) Combing the standing crops with preliminary separation of loose grains PDF
(Rus)
Ozhereliev V., Nikitin V., Sinyaya N., Chaplygin M., Fedina T.
卷 80, 编号 2 (2013) Cleaning of pulley working surfaces in flax pullers
Vinogradov A.
卷 81, 编号 10 (2014) Cleaning the high-pressure hoses from industrial dirt
Makarkin I., Nikolayev Y.
卷 76, 编号 3 (2009) Practical use of electrical-and-hydrodynamicpump
Sokovikov V., Strokov P., Golubeev D.
卷 76, 编号 1 (2009) An instrument for measuring fuel consumption
Gorshkov Y., Zainishev A., Ptashkina-Girina O., Dmitriev M., Potemkina D.
卷 82, 编号 8 (2015) The 80th anniversary of P.A. Amelchenko
- -.
卷 76, 编号 3 (2009) Parameters of device for separation of soil clods andstones
Filippov A.
卷 82, 编号 5 (2015) Package-combined agricultural machine for strip tillage
Samadalashvili A.
卷 80, 编号 11 (2013) In memory of A.A. Karpov
- -.
卷 79, 编号 5 (2012) In memory of academician I.P. Ksenevich
- -.
卷 80, 编号 1 (2013) In memory of academician Ya.S. Gukov
- -.
卷 82, 编号 4 (2015) In memory of V.P. Shevchuk
- -.
卷 83, 编号 7 (2016) In memory of V.S. Safronov PDF
(Rus)
- -.
卷 78, 编号 1 (2011) In memory of G.G. Kolobov
- -.
卷 76, 编号 6 (2009) Pamyati G.K. Vasil'eva
Osobov V., Kolchin N., Lomakin B.
1301 - 1400 的 2398 信息 << < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 > >>