检索

3D Model of Transfer of Pollutions from Motor Vehicles to the Air

Sukhinov A., Gadelshina B., Lyubomischenko D.

(Rus)

卷 3, 编号 1 (2009)

Accuracy Enhancement for Vehicle Motion Mathematical Model on the Basis of Test Results

Kurmaev R., Lepeshkin A.

卷 7, 编号 1-1 (2013)

Mathematical problems of calculating the multi-zone models of a cycle of internal combustion engine with spark ignition

Apelinskiy D., Shenderovskiy I., Runovskiy K.

(Rus)

Theoretical Study of Vibration Characteristics of a Powertrain of an All-wheel Drive Vehicle Driving on a Rough Road

Dementyev Y., Le Trong Cuong L.

(Rus)

卷 8, 编号 2-5 (2014)

Nondeductive logic and the problem of computer representation of knowledge

Inozemtsev V.

(Rus)

Features of Forming Disks of Gas Turbine Engines of Heat-Resistant Nickel Alloys with a Physical Model of Liquid-Phase Sintering of Pellets

Burlakov I.

(Rus)

Mathematical Model of Vehicle Motion as a Multimass System

Bakhmutov S., Gusakov D.

(Rus)

MATHEMATICAL MODELING OF HYDRAULIC DRIVE OF A FAN FOR AUTOMOTIVE ENGINE COOLING SYSTEM

Trukhanov K.

(Rus)

Economic and mathematic model of foreign trade relations

Katanaev N., Zakharova A., Simutina M.

(Rus)

Propulsion of Logging Machines with Individual Electromechanical Wheel Drives of Rolling Over Type

Sergeev A.

(Rus)

Problems on Creating of a Multimass Mathematical Model of Vehicle Motion and Methods of their Solution

Bakhmutov S., Gusakov D.

(Rus)

Strength analysis of the frame of the unit for long loads when modifying the geometry of its elements

Mishin P., Osipov N., Kramskoy N.

(Rus)

Determination of the influence of formative factors on design of conceptual objects in transport design and algorithm of through design

Lepeshkin I., Matersheva E.

(Rus)

Generalized mathematical model of vibration load of mobile machines with random kinematical excitation

Podrubalov V., Nikitenko A., Podrubalov M.

(Rus)

卷 7, 编号 4-1 (2013)

Socially oriented market economy: past, present and future

Filyakhin Y.

(Rus)

卷 7, 编号 1-5 (2013)

On liberalism, neoliberalism, monetarism, and economic policy in the Russian reformers’ activities

Gninenko A.

(Rus)

卷 8, 编号 2-2 (2014)

Hardening of chromium steels in vacuum

Ovsyannikov B., Vasilevsky V., Kulomzin E.

(Rus)

卷 8, 编号 3-5 (2014)

Main directions for coordination graduate models of educational institutions and institutions of higher education

Andrukh O., Bugakov I.

(Rus)

卷 8, 编号 1-5 (2014)

Design features of organizational structures of the executive branch at regional and municipal levels

Burlakov V., Sadkov V., Vlasenkova E.

(Rus)

卷 9, 编号 1-4 (2015)

Limiting parameters of forming round steel sheet, locally loaded by combined profile punch

Mikhaylova V., Petrov V., Sukhomlinov L.

(Rus)

卷 11, 编号 1 (2017)

Control of dynamics of tractor with electronic gearshift control

Timofievskiy A.

(Rus)

卷 12, 编号 2 (2018)

Mathematical model for assessing the influence of a coupled suspension system on the smooth running of a tracked vehicle

Sarach E., Cipilev A., Kurasova M.

(Rus)

SIMULATION MODELING OF ABS OPERATION BASED ON THE QUASI-SPATIAL DYNAMIC MODEL OF A VEHICLE

Lata V., Solomatin N., Okunev A., Eremina I., Ermolin A.

(Rus)

The application of finite elements method for characterization of process variable in operations of metal sheet tension

Sukhomlinov L., Shvaya A.

(Rus)

Improvement of Geometrical Parameters of Surface Quality in Process of Broaching on the Basis of Modernization of Cutting Tool Design

Bekayev A., Shchedrin A., Skoromnov V.

(Rus)

卷 4, 编号 1 (2010)

Dimensional Nonlinear Finite Element Model of the Front-Drive Car with Exhaust System

Cherepanov L., Okunev A., Rogozhkin V.

(Rus)

Moment theory of wedge

Martinov V., Zverev A.

(Rus)

Self-excitation of oscillations of wheeled tractors frame when working in traction mode

Schetinin Y., Esenoskiy-Lashkov M., Sergeev A.

(Rus)

The calculation of volumetric accuracy

Maksimov J., Krylov O., Kuz'minskij D.

(Rus)

External infrasonic fields of ground vehicles

Grafkina M., Nyunin B., Sviridova E., Ralchenko V.

(Rus)

卷 7, 编号 1-5 (2013)

Methods of automated synthesis of innovative management solutions

Lukina S., Girko V.

(Rus)

卷 8, 编号 1-2 (2014)

The method of express-diagnostics of the roughness of the surface layer of machine parts on basis of a probabilistic model with hidden states

Palamar I., Julin S.

(Rus)

卷 4, 编号 1-4 (2014)

Extreme deformation of edge-fixed round steel plate under the action of a spherical punch which radius is much smaller than the radius of the plate

Mikhaylova V., Sukhomlinov L.

(Rus)

卷 9, 编号 4-5 (2015)

Performance evaluation of the competitiveness of goods

Uskov E., Vinogradova I.

(Rus)

卷 9, 编号 3-4 (2015)

Dynamic analysis of gear pair

Kalinin D.

(Rus)

卷 10, 编号 1 (2016)

Theoretical research bioethanol ICE operating process

Lavrov S., Apelinskiy D.

(Rus)

卷 12, 编号 3 (2018)

Digital PID controller for pneumatic and hydraulic systems

Truhanov K.

(Rus)

ANALYSIS OF INNOVATIVE MODELS OF MANAGEMENT AND ORGANIZATION DEVELOPMENT

Filyakin Y., Moguev B.

(Rus)

卷 3, 编号 2 (2009)

An incremental geometrically nonlinear finite element membrane model of sheet metal forming processes under action of rigid tools

Sukhomlinov L., Petrov V.

(Rus)

卷 3, 编号 2 (2009)

On the question of influence of geometrical perfection parameters of the surface of the workpiece

Bekaev A., Kouznetsov V., Schedrin A., Skoromnov V.

(Rus)

Vehicle Longitudinal Motion Simulation by Analytical Automatic Machines

Lepeshkin A., Katanaev N., Dragunov S.

(Rus)

Analytical method of estimating the results of interaction of elastic wheel with deformable bearing surface in the sustained straight rolling motion

Lepeshkin A., Petrov S.

(Rus)

The Hypothesis about the calculation of cutting forces accuracy. Designing of mathematical model

Volkov A., Matveev S.

(Rus)

Method of formation and selection of the optimal configuration of forming system for multi-coordinate processing

Lukina S., Ivannikov S., Manaenkov I.

(Rus)

卷 7, 编号 1-4 (2013)

Quality model of stable catalyzate on the unit of catalytic reforming of gasoline

Sofiev A., Rylov M.

(Rus)

卷 8, 编号 3-3 (2014)

Optimization of production of carbon black by using idealized model of the reactor

Borovkov A., Tsygankov M.

(Rus)

卷 8, 编号 1-5 (2014)

Deductive logic in solving computer knowledge representation

Inozemtsev V.

(Rus)

卷 9, 编号 4-5 (2015)

On the formation of readiness of students to innovative activity in the study of foreign languages

Volodina E., Volodina I.

(Rus)

卷 9, 编号 1-4 (2015)

Strength numerical and experimental investigation of bolted connection of parts under dynamic impact

Kulakov N., Lyubin A., Gavrilov E., Skakbaeva A., Panichenko I.

(Rus)

卷 10, 编号 4 (2016)

Evaluation of ability to regenerate oscillation energy by the suspension system of a two-axle truck

Malikov R., Smirnov A., Klimov A.

(Rus)

卷 12, 编号 2 (2018)

Topological optimization of the automobile bumper design under impact from the passive safety standpoint

Goncharov R., Zuzov V.

(Rus)

DEPENDANCE OF GRINDING ACCURACY FROM PARAMETERS OF SET-UP

Koltunov I., Lobanov A.

(Rus)

卷 5, 编号 1 (2011)

Model stability control vehicle systems

Komarov V.

(Rus)

卷 4, 编号 2 (2010)

Control of mediums ferrofraction: features of mass-operative characteristic of its magnetophoresis, two-exponential model

Sandulyak A., Sandulyak D., Polismakova M., Sandulyak A., Ershova V.

(Rus)

Mathematical Model of Road Complex Risk Assessment

Komarov V., Kuklev E.

(Rus)

Development of a mathematical model of an energy-absorbing seat, using the results of piling tests

Kulakov N., Gavrilov E.

(Rus)

The Hypothesis about the calculation of cutting forces accuracy. Cutting parameters. Designing of mathematical model

Volkov A., Matveev S.

(Rus)

卷 7, 编号 1-1 (2013)

Study of oscillations of the automobile power plant

Lomakin V., Yemelyanov A.

(Rus)

Building of crawler transporters of extra light weight category on the basis of units and components of automobiles

Gmyrya N., Sharipov V., Schetinin Y., Denisov A., Marinkin A., Baulina E.

(Rus)

卷 7, 编号 1-3 (2013)

Incremental geometrically nonlinear axisymmetric finite element model of forming process of thick sheet metals under the action of rigid tools

Sukhomlinov L., Mikhaylova V.

(Rus)

卷 8, 编号 1-5 (2014)

Geometrical modeling in SolidWorks

Knyazkov V., Fazlulin E.

(Rus)

卷 4, 编号 1-4 (2014)

Numerical simulation of the axisymmetric hydrolipoclasy of thin metal sheet, fixed on the contour

Petrov V., Sukhomlinov L.

(Rus)

卷 9, 编号 4-1 (2015)

Design process model in transportation design

Lepeshkin I., Kruglov S.

(Rus)

卷 9, 编号 1-4 (2015)

Mathematical methods for the analysis of migration processes on the basis of demographic data

Butusov O., Nikiforova O., Redikultseva N.

(Rus)

卷 11, 编号 2 (2017)

The use of hydraulic communication channel in technical systems

Trukhanov K.

(Rus)

卷 14, 编号 2 (2020)

The choice of the rational design of the mobile robot mover for urban environment

Tsipilev A., Smirnov I.

(Rus)

COMPARATIVE EVALUATION OF THE ERROR IN GRINDING OF BEARING RINGS

Koltunov I.

(Rus)

Simulation Point-drop Processes with Assembly Error of Thermal Heater Connection

Tolokonnikov S.

(Rus)

Velocity Profile in Cell of Granulated Medium (Adapted Model of Stokes Flow around Ball)

Sandulyak A., Sandulyak A., Ershova V.

(Rus)

卷 3, 编号 2 (2009)

Integrated assessment of power distribution law influence on operating characteristics of allwheel drive vehicle

Bakhmutov S., Gusakov D.

(Rus)

卷 6, 编号 2-2 (2012)

Application of an axisymmetric rigid-plastic finite element membrane model for evaluation of friction coefficients in sheet metal forming processes

Petrov V., Mikhaylova V., Sukhomlinov L.

(Rus)

卷 7, 编号 4-1 (2013)

The interaction of the propensity to consume and autonomous factors in the analysis and forecasting of dynamics of GDP

Filyakhin Y., Redin D.

(Rus)

卷 7, 编号 1-1 (2013)

Features of construction of static characteristics of independent suspensions of all-terrain vehicles by means of a spatial model

Gorobtsov A., Kartsov S., Polyakov Y.

(Rus)

The mathematical model for calculating the thickness distribution of the metal in stamping in multisection dies with rotating discs

Korobko T., Kozachishena E.

(Rus)

卷 8, 编号 1-2 (2014)

Use of artificial intelligence methods for constructing a mathematical model of a part for further technological design

Kordyukov A.

(Rus)

卷 8, 编号 3-5 (2014)

Formation of a comprehensive set of competencies of employees in industries of energy efficiency and energy conservation

Telemtaev M., Nurakhov N., Frolov V.

(Rus)

卷 9, 编号 4-5 (2015)

The role of leadership in the transformation of the innovation sphere

Shiriaev D., Vinogradova E.

(Rus)

卷 9, 编号 1-6 (2015)

Information Society and Space of Freedom

Omarova L.

(Rus)

卷 10, 编号 1 (2016)

Analysis of design schemes of combination of vehicles towing elements wheel drives

Gorelov V., Chudakov O.

(Rus)

卷 14, 编号 4 (2020)

Model of the dynamics of a wheeled vehicle for a complex of full-scale-mathematical modeling

Kositsyn B.

(Rus)

卷 5, 编号 2 (2011)

Analysis of the Mechanics of Cutting by a Cylindrical Drill with a Bridge

Olenin L.

(Rus)

卷 5, 编号 2 (2011)

Model of the Electroarc Discharge for Plasma Device of Low Power

Vladiyko V., Nazarov A., Eremin B., Martynov S., Andrukh O.

(Rus)

The Mathematics Model of Mechanism Forming the Spot Face of Rolling Wheel

Sergeev A., Cherny I.

(Rus)