Search

Issue
Title
Authors
Computer modeling of knowledge in artificial intelligence
Inozemtsev V.A.
Algorithm for determination of illumination intensity of solar panels of the Russian segment of the International Space Station
Sazonov V.V.
Analysis of the characteristics of external combustion heat engine by computer simulation
Potapov S.I., Nikishkin S.I., Piskarev M.Y.
The dependence of the demographic situation of migration flow showed by the example of the three simulated countries with different social and economic indicators
Pyrov P.V., Butusov O.B., Nikoforova O.P.
Influence of the centrifugal pump impeller vanes parameters on its energy performance at operating with high-viscosity liquid
Cheremushkin V.A., Lomakin V.O.
Determination of steam leaks through faulty labyrinth seals of a steam turbine
Zhinov A.A., Shevelev D.V.
Vibration levels on operator’s workplace and vibration protection characteristics of seat suspensions
Godzhayev Z.A., Lyashenko M.V., Shekhovtsov V.V., Potapov P.V., Iskaliyev A.I.
Computer-aided Design of Assemblies with Spatial Tolerances on the Basis of Interval Analysis
Yatsenko O.V.
Computational modeling of relaxation self-excited oscillations in the double-mass system with friction under alternating loading
Mikhailova V.L.
Modeling of engine starting process with a starter supplied from a capacitive energy storage
Garmash Y.V.
Simulation of a mixture formation in a cylinder of the engine running on Otto-Diesel cycle
Kamennyy A.V., Kostyukov A.V., Makarov A.R., Pustyntsev M.E.
Identification of parameters of the resistance movement of wheeled vehicles during operation
Shadrin S.S.
Mathematical model of operation of an active two-axle four-wheel carriage with equalizing beam suspension in steady rectilinear motion on deformable bearing surface
Lepeshkin A.V.
Automated process control system for the biosynthesis of enzymes
Zubov D.V., Tolchenov A.A.
Natural-model tests of materials and coatings in simulated intense radiant and convective heat transfer of elements of heat and power equipment. Part 2: Physical and technical characteristics of thermal stand for testing of materials and coatings of diesel engine thermally insulated combustion chamber
Merzlikin V.G., Maximov A.D., Tovstonog V.A., Chirin K.V., Abdulmyanov R.N.
Study of operation of the model of an integrated starter-generator in generator mode
Migunov A.L., Kaurov S.Y.
The current state of computational analysis methods of strength and reliability of vehicles wheels
Demyaniushko I.V., Mironova V.V., Loginov E.M.
Mathematical modeling of motion of lorry convoy on the deformable support surface in view of emerging dynamic processes
Selyuk D.V., Karpukhin S.A.
Modeling of the mechanism of appearance of external infrasound of land vehicles
Nyunin B.N., Grafkina M.V., Sviridova E.Y.
Experience in the use of microcontroller platforms and computer technologies in experimental researches of automotive and tractor machinery
Esakov A.E., Bernatskii V.V., Esenovskii-Lashkov M.Y.
Forecasting the energy characteristics of a reversible hydraulic machine for a head up to 250 m
Seleznev V.N.
The principles of rating development for innovative enterprise business partners reliability
Smetanov A.Y.
MATHEMATICAL MODELING OF HYDRAULIC DRIVE OF A FAN FOR AUTOMOTIVE ENGINE COOLING SYSTEM
Trukhanov K.A.
A numerical analysis of excited-by-friction relaxation self-excited oscillations of an electric steering drive at variable input signal speed
Mikhailova V.L.
Mathematical Simulation of Automotive Pollution Spreading by Control Volume Method
Gadelshin V.K., Lyubomischenko D.S., Sukhinov A.I.
Theoretical studies of dependence of geometric parameters of a contact between a tool and a workpiece on installation of a tool in the process of burnishing
Kuznetsov A.V., Vasiliev V.A., Bezhenar E.N., Zabolotnaya I.V., Sazonov D.A., Smirnov A.V.
Surface modeling of an automobile body in SolidWorks using technical drawing
Knyazkov V.V., Kolchin P.V., Fazlulin E.M.
Results of the study of the mathematical model of interaction of an elastic wheel with a deformable bearing surface under steady rectilinear rolling
Lepeshkin A.V., Kruglov S.M., Petrov S.E., Pkhakadze S.D.
Improving the efficiency of assembly processes of gas turbine engines rotors, based on simulation technologies
Timofeev М.В., Timofeeva Е.В.
Determination of values of the solution flow rate and temperature in carbon dioxide absorption process
Gureev A.O., Pikulin Y.G.
The amplitude-frequency characteristics and transfer functions of electromechanical wheel drive mover of rolling type
Sergeev A.I.
Research of extrusion process for piston-type hollow parts of car brake system cylinder by cold forging
Filippov Y.K., Tipalin S.A., Petrov M.A., Anfimov Y.N., Filippov K.Y.
Simulation of engine speed performance characteristics
Katanaev N.T., Lepeshkin A.V., Kolbasov A.F.
Optimization of the working cycle of a transport diesel engine by simulating the combustion process with a double Wiebe function
Kamaltdinov V.G., Markov V.A., Lysov I.O., Popov A.E., Smolij A.E.
Numerical simulation of the diesel engine starting considering air pre-heating in the intake system
Elagin M.Y., Khmelev R.N.
Mathematical simulation of the automatic control of the tractor power unit
Hoodorozhkov S.I., Krasilnikov A.A., Gubachov M.S.
NUMERICAL STUDY OF FRICTION AT UPSET FORGING WITH RADIAL EXTRUSION OF PARTS OF ROD WITH A THICKENING-TYPE OF ALUMINUM ALLOY AD1
Petrov M.A., Petrov P.A., Kalpin Y.G.
Hybrid electric vehicle development with mathematical simulation software application
Cheranev S.V.
Ecological features of carbonate deposit removal from the surface of manufacturing equipment
Artamonova I.V., Gorichev I.G.
Increase of effectiveness of two-shaft gas-turbine power units
Kustarev Y.S., Kostyukov A.V., Plykin M.E.
Numerical and experimental investigation of braking performance of a bus
Groshev A.M., Konikova G.A., Kostin S.Y., Trusov Y.P., Tumasov A.V.
Modeling of electromagnetic field in the resonator with regard to the measurement of the fuels water cut
Kardyshev G.A., Shatalov A.L., Suslin M.A.
Simulation of mechanical tests aimed to investigate the flow stress during the abrupt change of the strain rate
Potapenko K.E., Voronkov V.I., Petrov P.A.
Calculation of the purification process of carbon dioxide industrial gases
Gureev A.O., Pikulin Y.G.
The study of KAMAZ-4308 acceleration with single-threaded and dual-threaded clutch in transmission
Gorbatovskiy A.V., Kotiyev G.O., Chulyukin A.O.
Development of a souvenir bell with use of modeling
Filippov Y.K., Krutina E.V., Filippov K.Y.
Analysis of design schemes of combination of vehicles towing elements wheel drives
Gorelov V.A., Chudakov O.I.
The choice of the rational design of the mobile robot mover for urban environment
Tsipilev A.A., Smirnov I.A.
Validation of the mathematical model of the front drive axle suspension according to frequency response
Kulagin V.A., Rakhmatov R.I., Likeev A.P.
Modeling of the operation of a disc pump with the wall roughness consideration
Cheremushkin V.A., Lomakin V.O.
Validation of the CAE model set for a passenger car suspension according to loading criteria
Kulagin V.A.
Innovative research and development based on of 3D parametric modeling technology
Shpun'kin N.F., Petrov P.A., Strokov P.I., Gnevashev D.A., Nikitin M.Y.
SIMULATION MODELING OF ABS OPERATION BASED ON THE QUASI-SPATIAL DYNAMIC MODEL OF A VEHICLE
Lata V.N., Solomatin N.S., Okunev A.P., Eremina I.V., Ermolin A.V.
Effective designing of means of technological equipment by the automated preparation of machine-building manufacture
Spirin D.V., Arkatova N.A.
Adaptive Trailer Control System
Abramov A.M.
Evaluation of the conditions of oil seepage into the ground after corrosion damage of a tank covering
Kuts Y.N., Korolchenko I.A., Veksler G.B.
Methods of diagnostics of sensors of automotive electronic control systems with hybrid transmission
Nabokikh V.A., Safronov A.V.
Simulation of mixing in engine with split charge in a cylinder
Kuznetsov I.V., Sychev A.M., Denisov A.V.
Analysis of the results of mathematical modeling of curvilinear motion of three-axle all-wheel drive vehicle with locked interaxle drive
Lepeshkin A.V., Katanaev N.T., Medvedev A.S., Simochkin A.V.
Geometrical modeling in SolidWorks
Knyazkov V.V., Fazlulin E.M.
Estimation of traction and dynamic properties of an 8×8 car with individual wheel drives on a chassis dynamometer
Kotiev G.O., Gorelov V.A., Zakharov A.Y.
Mathematical methods for the analysis of migration processes on the basis of demographic data
Butusov O.B., Nikiforova O.P., Redikultseva N.I.
Mathematical modeling of cargo oscillations on the mobile machine manipulator load lifting body
Kovalskiy V.F., Lagerev I.A.
Development and testing of a mathematical model of the engine pre-start operation at low ambient temperatures
Yelagin M.Y., Pavlov D.V., Khmelev R.N.
Study of the potential use of hydrodiodes to enhance the volumetric efficiency of a centrifugal pump
Fomenko V.D., Petrov A.I., Efremov E.V.
Investigation of cavitation properties of a mobile pumping unit
Konshin D.S., Konkeyev E.M., Protopopov A.A., Petrov A.I.
An energy efficiency analysis of the electrodynamic antispin regulation of the city electrobus
Zhileykin M.M., Klimov A.V., Maslennikov I.K.
Modeling of workpiece locating chart on machine-tools
Timiryazev V.A., Novikov V.Y., Kostenko A.A.
Development of Software for Calculation of a Spatial Dimension Chain
Ankin A.V., Kuzminsky D.L.
Investigation of the Kinematics of the Radial Extrusion Process with the Running Deformation Zone
Kalpin Y.G., Petrov P.A., Petrov M.A.
Modeling of the device for balancing of a Li-Ion battery with switched capacitors for electric vehicles
Varlamov D.O.
Multilevel integrated quality management system for electrical equipment at automobile lifecycle stages
Pimkina E.S., Kozlovskiy V.N., Maleyev R.A.
Simulation of the process of cultivation of phototrophic microorganisms in a multisection’s photobioreactor
Zubov D.V., Strokov S.S.
Full-scale-model tests of materials and coatings at simulation of intense radiation and convective heat transfer of heat power equipment elements
Merzlikin V.G., Maximov A.D., Tovstonog V.A., Krokhalev I.N.
Mathematical modeling of measuring transducers
Golovin V.V., Latyshenko K.P.
Rayleigh-Taylor instability in the high-speed collision of metal plates
Fortova S.V., Son E.E., Doludenko A.N.
Definition of optimum parameters of workpieces and superplastic forming and isothermal stamping operations for the manufacturing of thin-walled details of gas-turbine engines
Temis J.M., Khudyakov A.P., Cherednichenko A.V.
Mathematical modeling of the dynamics of manipulation system for mobile transport and technological machine with reference to the elasticity of elements
Kovalskiy V.F., Lagerev I.A.
Investigation of the relationship between theoretical and actual turning radii of a tracked vehicle using mathematical modeling
Stadukhin A.A.
Study of the operability and effectiveness of the algorithm for controlling the acceleration and deceleration of a wheeled vehicle by means of an accelerator pedal in conditions of highway traffic
Klimov A.V., Ospanbekov B.K., Antonyan A.V.
The spark plug’s thermal state simulation
Yakhutl D.R., Maleev R.A., Zuev S.M., Shmatkov Y.M., Ryabykh E.A.
Numerical study of the effect of droplet coagulation intensity on polydisperse aerosol fraction distribution
Tukmakov D.A.
CREATING A PROMISING TOOL FOR THE PLANETARY SHAPING OF INTERNAL THREADS ON THE BASIS OF VISUALIZATION OF 3D-MODELING
Kosarev V.A., Ivanov V.F.
INCREASE OF EFFECTIVENESS OF A ROTARY HEAT EXCHANGER OF A SMALL-SIZE GAS TURBINE ENGINE
Kostyukov A.V., Alekseev R.A.
Simulation of Tooling System Rigidity for Estimation Their Influence on Working Accuracy
Pini B.E., Zinovyev D.A.
Optimal control theory solutions for investigation of a hybrid electric vehicle’s powertrain
Kulikov I.A.
Statistical modeling of the output parameters in process of machining of ceramic composite materials with using bound-abrasive
Bakharev V.P., Knutova E.E.
Modeling combined extrusion process to assess the limit of forming blanks from different materials
Ogorodnikov V.A., Dereven'ko I.A.
Development of technology for the manufacture of forgings with spikes on the basis of piecemeal stamping
Malikov S.A., Volodin I.M.
Study of the process of heat transfer in mesh matrix of rotary heat exchanger
Alekseev R., Kostyukov A.V., Kosach L.A.
Scaling parameters and modeling flutter of a cylindrical shell
Kiyko I.A., Pokazeev V.V.
Modeling of uneven flanging process
Tipalina A.V., Filippov Y.K., Panfyorov V.V., Kuchkovsky Y.P., Boronnikov D.A.
Development of a mathematical model of an articulated cross-country vehicle for the Arctic zones of the Russian Federation, regions of the Far North and the Far East
Gorelov V.A., Kartashov A.B., Kovtun K.I., Komissarov A.I.
Mathematical modeling of the functioning process of a single-cylinder air-cooled diesel engine taking into account the consumption of crankcase gases
Pavlov D.V., Platonov K.Y., Khmelev R.N.
Development and research of the model of a wheel-legged robot
Dyakov A.S., Evseev K.B., Fedorov D.S.
Numerical simulation of cavitation in the flow path of a reversible hydraulic machine for a head up to 250m
Seleznev V.N.
Method for determining the temperature fields of the spark plug
Yakhutl' D.R., Maleyev R.A., Zuyev S.M., Shmatkov Y.M., Ryabykh Y.A.
Structural modeling and classification of methods of electrochemical machining
Saushkin S.B., Morgunov Y.A.
Simulation Point-drop Processes with Assembly Error of Thermal Heater Connection
Tolokonnikov S.V.
Numerical modelling of the temperature fields in coolant jacket of internal combustion engine
Zhilin A.A., Zharov A.V.
1 - 100 of 124 Items 1 2 > >> 

Search tips:

  • Search terms are case-insensitive
  • Common words are ignored
  • By default only articles containing all terms in the query are returned (i.e., AND is implied)
  • Combine multiple words with OR to find articles containing either term; e.g., education OR research
  • Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
  • Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
  • Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
  • Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"