期 |
标题 |
文件 |
卷 80, 编号 7 (2013) |
Vibration roller as an automatic system for soil density equalization |
|
Shapar M., Shishlov A.
|
卷 85, 编号 5 (2018) |
Vibration analysis of diesel turbocharger for agricultural use |
(Rus)
|
Kaminsky R., Kovaltsov I., Kostyukov E., Sibiryakov S., Filippov A.
|
卷 90, 编号 6 (2023) |
Vibration loading of booms ofaself-propelled sprayer with ultra-low pressure tires |
(Rus)
|
Pryadkin V., Kolyadin P.
|
卷 78, 编号 4 (2011) |
Vibrating pneumatic seed separator with improved deck |
|
Galkin V., Grubov K.
|
卷 85, 编号 6 (2018) |
Visualization of the results of mathematical modeling of dynamic processes in mobile power facilities |
(Rus)
|
Kuznecov A., Polivaev O., Loshchenko A.
|
卷 76, 编号 6 (2009) |
Vikhrevoy apparat dlya okhlazhdeniya zernovykh materialov |
|
Borontsoev A.
|
卷 81, 编号 8 (2014) |
Contribution of teaching and learning commission to the development of higher automotive education |
|
Serebryakov V., Kravets V.
|
卷 78, 编号 12 (2011) |
Tractors' power and reliability |
|
Stopalov S.
|
卷 79, 编号 3 (2012) |
Influence of absolute soil humidity on the porosity of soil packing |
|
Makhmutov M., Chepurnoy A., Makhmutov M., Dzhabarov A.
|
卷 87, 编号 2 (2020) |
The effect of anisotropy on the interaction of the caterpillar propeller with the soil during the vehicle turn |
(Rus)
|
ZHakov A., Troyanovskaya I.
|
卷 88, 编号 3 (2021) |
The influence of the reinforcement of the chisel-shaped area of the ploughshare on the change in the geometric parameters of radial wear during operation |
(Rus)
|
Kozarez I., Mikhal'chenkova M., Lavrov V., Perepechina Y.
|
卷 83, 编号 9 (2016) |
Influence of reinforcement of ploughshares surface on their thickness wear |
(Rus)
|
Kozhukhova N., Sinyaya N.
|
卷 79, 编号 8 (2012) |
Effect of lifting height of exhaust valve on the exhaust system |
|
Zholobov L., Suvorov Y.
|
卷 81, 编号 8 (2014) |
Influence of hydraulic fluid viscosity on the efficiency coefficient of hydrodynamic transmission |
|
Dyachkov Y., Fedyanov Y.
|
卷 83, 编号 4 (2016) |
Impact of turbocharging on the startability of diesel engines in winter |
(Rus)
|
Krokhta G., Khomchenko E., Usatykh N.
|
卷 78, 编号 10 (2011) |
Influence of rubbing surfaces' geometry on the durability and wear resistance of tribounits |
|
Kochenov V.
|
卷 77, 编号 3 (2010) |
Effect of geometric parameters of blank surface quality on the macro- and microgeometry of processing surface |
|
Bekayev A., Sсhedrin A., Tsvetkov I.
|
卷 83, 编号 3 (2016) |
Influence of particulate filler from waste fractions of abrasive wheels on wear-out rate of composites based on epoxy |
(Rus)
|
Mikhal'chenkov A., Biryulina Y., Mikhal'chenkova M.
|
卷 80, 编号 8 (2013) |
Influence of acceptable wearing of a part on its reliability parameters |
|
Tabakov P.
|
卷 76, 编号 1 (2009) |
Effect of oscillations of supported housing parts on the loading sections of tractor power train |
|
Godzhayev Z., Shekhovtsov V., Lyashenko M., Sokolov-Dobrev N., Shevchyuk V.
|
卷 83, 编号 4 (2016) |
Influence of the number of undercarriage axles of mobile agricultural machinery on the depth of track |
(Rus)
|
Shilo I., Orda A., Romanyuk N., Nukeshev S., Kushnir V.
|
卷 90, 编号 3 (2023) |
Influence of the Mg/MoO3 additive to diesel fuel on heat output |
|
Abalyaev A., Lyukhter A.
|
卷 83, 编号 7 (2016) |
Influence of ploughshare design and welding reinforcement on the hardness of its nose part |
(Rus)
|
Denisov V., Kozhukhova N., Orekhova G., Mikhal'chenkova M.
|
卷 85, 编号 6 (2018) |
Influence of the deseeding device design on the air flow characteristics in the combing chamber of the flax harvester |
(Rus)
|
Shishin D.
|
卷 82, 编号 4 (2015) |
Influence of design and technological parameters of forage shredder on the specific work of shredding |
|
Obolenskiy N., Bulatov S., Vandysheva M.
|
卷 81, 编号 8 (2014) |
Influence of torsional oscillations of internal-combustion engine on the loads in running gear of a tracked grain and fodder combine |
|
Ryabchenko V., Yemelyanov A., Kandelya M.
|
卷 86, 编号 5 (2019) |
The influence of local loosening of the soil on soybean productivity |
(Rus)
|
Pashchenko V., Syromyatnikov Y., Hramov N., Vojnash S.
|
卷 90, 编号 3 (2023) |
Influence of the harvesting method on the processes of moisture accumulation and yield capacity |
|
Chekusov M., Kem A., Mikhaltsov E., Damansky R., Shmidt A.
|
卷 85, 编号 1 (2018) |
The influence of modifiers on the conservation of rubber products of agricultural machinery |
(Rus)
|
Mel'kumova T.
|
卷 78, 编号 10 (2011) |
Influence of operator's motivation on the performance of man-machine systems |
|
Lipkovich I., Petrenko N.
|
卷 80, 编号 10 (2013) |
Influence of wheeled tractor unsteady loading with hook force on the slipping coefficient |
|
Kuznetsov N., Gapich D., Shiryayeva Y.
|
卷 78, 编号 7 (2011) |
Influence of key parameters of rotary disk shredder on the power of sunflower cutting |
|
Budashov I.
|
卷 79, 编号 12 (2012) |
Influence of residual stresses on the precision of crawler tracks’ hollow fingers under high-temperature thermomechanical treatment with deformation by screw cogging |
|
Dementyev V., Zasypkin A.
|
卷 77, 编号 10 (2010) |
Effect of turbine compressor cooling on the indexes of tractor diesel |
|
Antipov Y., Barskiy I., Valyekho Maldonado P., Shatalov I.
|
卷 80, 编号 7 (2013) |
Influence of wheel parameters on tire volume |
|
Makhmutov M., Bykovskiy V.
|
卷 79, 编号 9 (2012) |
Influence of parameters of the diametrical fan's wheel blades on the acoustic characteristics |
|
Sychugov N., Zholobov N.
|
卷 82, 编号 12 (2015) |
Influence of parameters of blade rotary working organ on unevenness of furrow bottom |
|
Akimov A., Konstantinov Y.
|
卷 88, 编号 5 (2021) |
The influence of the parameters of the running systems of wheeled vehicles on the change in soil density |
(Rus)
|
Shilo I., Romanyuk N., Kruk I., Orda A., Galimov R., Maksimovich K., Voynash S., Luchinovich A.
|
卷 90, 编号 5 (2023) |
Influence of parameters of a screw dispenser on its dosing accuracy |
|
Bulatov S., Isupov A., Nechaev V., Pronin A., Tareeva O.
|
卷 79, 编号 1 (2012) |
The influence of planetary clutch gear ratio on the rigidity of pneumohydraulic elastic element |
|
Kuznetsov N., Nekhoroshev D., Nekhoroshev D.
|
卷 86, 编号 6 (2019) |
The effect of overlapping adjacent passages of the unit on the uniformity of the application of mineral fertilizers |
(Rus)
|
Sedashkin A., Kostrigin A., Milyushina E.
|
卷 83, 编号 2 (2016) |
Influence of measurement errors on the results of grading during inspection of machine parts |
(Rus)
|
Shkaruba N.
|
卷 82, 编号 6 (2015) |
Influence of using of methanol and rapeseed methyl ester on combustion process and effective indicators of 2Ч 10,5/12,0 diesel engine |
|
Likhanov V., Devetyarov R., Fominykh A., Kopchikov V., Araslanov M., Kozlov A.
|
卷 78, 编号 9 (2011) |
Effect of ethanol-fuel emulsion on the indicator, environmental performance and the characteristics of diesel engine heat release |
|
Likhanov V., Chuprakov A., Zonov A., Sharomov I.
|
卷 84, 编号 1 (2017) |
THE IMPACT FORCED FLUID COOLING OF FRICTION PAIRS IN AUTOMOTIVE CLUTCHES ON ITS THERMAL LOAD |
(Rus)
|
GORODETSKIY K., SHARIPOV V., YEVTUSHIK O., BERNATSKIY V., DMITRIYEV M., SHCHETININ Y.
|
卷 77, 编号 9 (2010) |
Effect of intermediate layer on the mechanical properties of coatings obtained by electric arc welding |
|
Burak P.
|
卷 87, 编号 6 (2020) |
The influence of the combined coulter operation on the quality and yield of grain |
(Rus)
|
Kem A., Chekusov M., Shmidt A.
|
卷 78, 编号 5 (2011) |
The influence of field sizes on the fuel consumption per hectare by class 1,4; 3 and 5 tractors |
|
Smirnov V.
|
卷 82, 编号 11 (2015) |
Influence of position of A-hoe blades of sowing machines on their wear |
|
Solovyev S., Kozarez I., Feskov S.
|
卷 77, 编号 2 (2010) |
Effect of combustion controllers on the technical-and-ecological characteristics of internal combustion engines |
|
Kozhin D.
|
卷 78, 编号 11 (2011) |
The influence of soil properties and knife disc operating depth on the disc resistance |
|
Akimov A., Konstantinov Y., Akvilyanova I.
|
卷 82, 编号 5 (2015) |
Influence of vibratory roller speed on uniformity of soil compaction |
|
Shapar M., Shishlov S.
|
卷 85, 编号 3 (2018) |
Influence of the speed of the floating conveyor on the separating ability of the bottom of the inclined chamber |
(Rus)
|
Ozherel'ev V., Nikitin V., Komogorcev V.
|
卷 86, 编号 5 (2019) |
The influence of the speed of the floating conveyor to the separating ability of the bottom of the inclined chamber |
(Rus)
|
Ozhereliev V., Nikitin V., Sinyaya N., Kuzyur V., Kuznetsov A.
|
卷 83, 编号 6 (2016) |
Influence of accidental load on the effective power of gas-turbine and diesel engines being a part of soil cultivating units |
(Rus)
|
Shkrabak V., Dzhabborov N., Fed'kin D., Shkrabak R.
|
卷 82, 编号 12 (2015) |
Influence of composition of water-biofuel emulsion on diesel engine performance |
|
Markov V., Devyanin S., Nagornov S., Levina Y.
|
卷 81, 编号 12 (2014) |
Influence of mixed biofuel composition on the parameters of fuel injection process in diesel engine |
|
Markov V., Akimov V., Shumovskiy V., Markova V.
|
卷 81, 编号 1 (2014) |
Influence of stochastic external loading conditions on the performance of machine and tractor unit |
|
Eviyev V., Ochirov N., Mudzhikov B.
|
卷 77, 编号 3 (2010) |
Effect of structure of flow divider for electrohydraulic servovalve on the inflexibility of hydraulic drive speed characteristic |
|
Goravskiy S., Strok Y.
|
卷 78, 编号 2 (2011) |
Influence of engine temperature on the piston rings' parameters |
|
Ivashentsev G., Khokhlov A.
|
卷 79, 编号 10 (2012) |
Impact of cold gas-dynamic spraying operating modes on the coefficient of utilization of powder stuff |
|
Senin P., Rakov N., Makeykin A.
|
卷 80, 编号 2 (2013) |
Influence of processing factors on the workmanship of tractors and agricultural machines’ parts |
|
Ivannikov S., Shandov M.
|
卷 83, 编号 9 (2016) |
Influence of technology level of fuel on the efficiency of operation of internal combustion engines of motor-and-tractor vehicles |
(Rus)
|
Kerimov M., Safiullin R., Marusin A.
|
卷 81, 编号 12 (2014) |
Influence of tractor fleet on technical equipment indices and resource availability of mechanized agricultural production |
|
Shevtsov V., Lavrov A.
|
卷 77, 编号 9 (2010) |
Effect of laboriousness of antiskid devices arrangement on the number of detachable grousers |
|
Slavkin V., Makhmutov M.
|
卷 81, 编号 5 (2014) |
Influence of inclination angle of riffles on threshing mechanism power consumption |
|
Ozherelyev V., Nikitin V., Sinyaya N.
|
卷 86, 编号 2 (2019) |
The influence of the angle of loosening of the working body of an agricultural instrument on the intensity of destruction of soil aggregates |
(Rus)
|
Myalenko V.
|
卷 86, 编号 4 (2019) |
Influence of angular damping coupling on the vibrations of a triaxial two-section non-suspension wheeled vehicle |
(Rus)
|
Novikov V., Pozdeev A.
|
卷 77, 编号 6 (2010) |
Effect of biomass-and-mineral fuel ultrasonic treatment on the tractor diesel indices |
|
Ukhanov A., Ukhanov D., Ivanov V., Blagodarina L., Demidov Y., Safarov R.
|
卷 82, 编号 12 (2015) |
Influence of vibration level of color sorter’s vibratory feeder on the quality of buckwheat seeds cleaning |
|
Myasnyankin K., Tarasenko A.
|
卷 80, 编号 6 (2013) |
Influence of harvesting conditions on grain losses after separator |
|
Kravchuk V., Zanko N., Lysak A.
|
卷 78, 编号 11 (2011) |
The influence of tension displacement phase angle on the quality of coatings under combined method |
|
Gorokhova M.
|
卷 77, 编号 1 (2010) |
Effect of physical-and-chemical indices of biodiesel fuel on the parameters of diesel and its ecological-and-operating characteristics |
|
Semenov V., Rudachenko S.
|
卷 83, 编号 8 (2016) |
Influence of the shape of disk knife on the pinching of material |
(Rus)
|
Kobyakov I., Evchenko A., Demchuk E.
|
卷 87, 编号 4 (2020) |
Influence of the shape of potato tubers on the quality of separation into fractions by the working bodies of potato sorting machines |
(Rus)
|
Romanyuk N., Yednach V., Voynash S.
|
卷 77, 编号 9 (2010) |
Influence of class 3 tractors' running gears on the soil compaction and crop yield |
|
Zakharchenko A., Zaikina I., Zakharchenko A.
|
卷 86, 编号 1 (2019) |
The influence of the number of axles of wheeled transport traction machines on rolling resistance |
(Rus)
|
SHilo I., Romanyuk N., Orda A., Kushnir V.
|
卷 83, 编号 1 (2016) |
Reynolds number effect on the aerodynamic characteristic of transverse fans |
(Rus)
|
Sychugov N.
|
卷 80, 编号 5 (2013) |
Impact of the operational factors on lubrication conditions of crankshaft bearings of motor and tractor engines |
|
Makushin A., Barylnikova Y.
|
卷 81, 编号 8 (2014) |
The 75th anniversary of V.N. Kaminskiy |
|
- -.
|
卷 80, 编号 8 (2013) |
Water and fuel combustion in internal combustion engine |
|
Dunayev A., Zheleznitskiy A.
|
卷 78, 编号 2 (2011) |
Possible ways of increasing technical and economical performance of tractor diesel engines |
|
Gabdrafikov F., Shamukayev S., Abrarov M., Mekhonoshin Y.
|
卷 83, 编号 10 (2016) |
Revival of domestic agricultural engineering is an urgent and important task of the state |
(Rus)
|
Kolchin N.
|
卷 81, 编号 7 (2014) |
Issues of progress of national agricultural machinery industry |
|
Tubolev S., Kolchin N.
|
卷 78, 编号 10 (2011) |
Memories of the chief designer |
|
Abdula S.
|
卷 76, 编号 10 (2009) |
Restoration of "boitsov's traditions" - a pledge of successful revival of Russia |
|
Khrul'kevich O.
|
卷 88, 编号 6 (2021) |
Restoration and alloying of working bodies of earth-moving machinery |
(Rus)
|
Kazannikov O., Popov E.
|
卷 81, 编号 1 (2014) |
Renewal and strengthening of A-hoe blades for cultivating machines using ceramic-metal materials |
|
Titov N., Kolomeychenko A.
|
卷 79, 编号 10 (2012) |
Recovery of machine body parts by combined structured coatings |
|
Kotin A., Sivtsov V., Konakov A., Rusyayev A.
|
卷 79, 编号 10 (2012) |
Renewal of НШ-К round gear type hydraulic pumps with the use of combined method |
|
Senin P., Nuyanzin Y., Ionov P., Velichko S.
|
卷 82, 编号 3 (2015) |
Restoring of moldboards by abrasion-resistant dispersion-strengthened composite based on epoxy resin |
|
Mikhalchenkov A., Solovyev R., Biryulina Y.
|
卷 82, 编号 1 (2015) |
Restoring of moldboards of various purposes by the method of steel plating |
|
Mikhalchenkov A., Novikov A.
|
卷 79, 编号 4 (2012) |
Restoration of spring teeth of agricultural machinery |
|
Elkin S., Safonov V., Polupanov I.
|
卷 79, 编号 4 (2012) |
Restoration of combustion engine's camshafts with plasma welding |
|
Yudin V., Shipovalov A., Khrapkov G., Nosikhin P.
|
卷 82, 编号 2 (2015) |
Recovery of gears of НШ-А hydraulic pumps using free repair sizes method |
|
Velichko S., Martynov A.
|
卷 79, 编号 10 (2012) |
Recovery of spindle units by polymer composites |
|
Yefanov S., Kotin A., Fedchenko V.
|
卷 87, 编号 6 (2020) |
Restoration of hydraulic cylinder rods by method of ESA |
(Rus)
|
Kazannikov O., Otmakhov D.
|
卷 77, 编号 1 (2010) |
80th anniversary of V.P. Grebnev |
|
- -.
|
卷 78, 编号 11 (2011) |
The 75th anniversary of V.P. Yelizarov |
|
- -.
|
卷 77, 编号 9 (2010) |
The 70th anniversary of V.R. Alioshkin |
|
- -.
|
201 - 300 的 2302 信息 |
<< < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 > >> |