| Edição |
Título |
Arquivo |
| Volume 19, Nº 4 (2018) |
METHOD OF QUALITY ANOMALIES DETECTION IN INTERACTIVE ELECTRONIC TECHNICAL MANUALS FOR AIRCRAFT MAINTENANCE AND REPAIR |
(Rus)
|
|
Frolova E., Ivakin Y., Smirnov A.
|
| Volume 16, Nº 2 (2015) |
GREEDY HEURISTIC METHOD FOR LOCATION PROBLEMS |
(Rus)
|
|
Kazakovtsev L., Antamoshkin A.
|
| Volume 16, Nº 3 (2015) |
METHOD of waveguides with conductive vacuum coating fabrication |
|
|
Khomenko I., Ravodinа D., Mikheev A., Eresko T., Eresko S.
|
| Volume 14, Nº 5 (2013) |
METHOD OF MEASURE OF MICROWAVE RADIATION AT THE FOREST CANOPY USING GLONASSAND GPS-SIGNALS |
(Rus)
|
|
Mironov V., Mihaylov M., Sorokin A., Muzalevskiy K., Fomin S.
|
| Volume 10, Nº 1-2 (2009) |
RESEARCH METHOD FOR THERMAL-OXIDATIVE STABILITY OF MOTOR OILS UNDER TESTING TEMPERATURE CYCLING |
(Rus)
|
|
Danilenko V., Kovalskiy B., Vishnevskaya E., Bezborodov Y., Ananjin N.
|
| Volume 15, Nº 3 (2014) |
Hermite bicubic collocation method in domain with curvilinear boundary |
(Rus)
|
|
Kireev V.
|
| Volume 11, Nº 3 (2010) |
Method of control of topping-up effects influence on changeof motor oils resource |
(Rus)
|
|
Vasiljev S., Popov A., Kovalskiy B.
|
| Volume 13, Nº 5 (2012) |
METHOD FOR MONITORING OF IMPACT OF MAGNETIC FIELDS IN THE PROCESS OF ELECTRON-BEAM WELDING BY X-RAY RADIATION FROM TREATMENT AREA |
(Rus)
|
|
Druzhinina A., Laptenok V., Murygin A., Seregin Y.
|
| Volume 24, Nº 3 (2023) |
Research of a method based on the local deformation of the metall mesh by the force of air drawn through its surface, for measuring and controlling the tension force of the metall mesh cavity on radio-reflecting reflectors |
(Rus)
(Eng)
|
|
Gracheva E., Sin'kovskiy F.
|
| Volume 11, Nº 4 (2010) |
METHOD OF CONCEPTUAL OLAP-MODELLING BASED ON FORMAL CONCEPTUAL ANALYSIS |
(Rus)
|
|
Korobko A., Pen'kova T., Korobko A., Penkova T.
|
| Volume 24, Nº 3 (2023) |
N-version programming for nanosatellite telemetry processing |
(Rus)
(Eng)
|
|
Efremova S.
|
| Volume 13, Nº 3 (2012) |
METHOD OF DETERMINATION OF SPECTRUM FACTORS VECTOR DUE TO LIKELIHOOD RATIO CRITERION |
(Rus)
|
|
Tyapkin V., Dmitriev D., Konnov V., Fomin A.
|
| Volume 10, Nº 1-2 (2009) |
METHOD OF THERMAL-OXIDATIVE STABILITY OF LUBRICANTS ASSESSMENT |
(Rus)
|
|
Danilenko V., Kovalskiy B., Bezborodov Y., Malysheva N., Vishnevskaya E.
|
| Volume 11, Nº 5 (2010) |
METHOD OF ESTIMATION OF INFLUENCE OF ADDITIVE DISTURBANCE ON INPUT OF A RECEIVER OF SIGNALS WITH THE HELP OF IDENTIFICATION OF KINDS OF DISTRIBUTION LOWS |
(Rus)
|
|
Krotova E., Krotova E.
|
| Volume 13, Nº 3 (2012) |
METHOD OF RELIABILITY ESTIMATION OF COMPLICATED SYSTEMS , CALCULATION OF WHICH CAN NOT BE REDUCED TO A SERIAL-PARALLEL ELEMENT CONNECTION SCHEME |
(Rus)
|
|
Furmanova E., Boyko O., Shaimardanov L.
|
| Volume 18, Nº 3 (2017) |
IMPROVEMENT OF INSULATION RESISTANCE MEASUREMENT ACCURACY DURING SPACECRAFT POWER SYSTEM TESTS |
(Rus)
|
|
Shtabel N., Samotik L., Mizrah E.
|
| Volume 11, Nº 4 (2010) |
METHOD OF SEARCH OF THE SET TEMPLATE IN TIME SERIES |
(Rus)
|
|
Eremeevskiy A., Khanov V., Eremeevski A., Khanov V.
|
| Volume 10, Nº 1-1 (2009) |
Method of full sorting out in the problem of regressive polifactor-analisis |
(Rus)
|
|
Mitasov I., Zavyalkin A.
|
| Volume 16, Nº 2 (2015) |
TECHNOLOGY READY USE FOR PRODUCING NANOMATERIALS IN THE PLASMA OF A LOW-PRESSURE PULSED ARC DISCHARGE |
(Rus)
|
|
Ushakov A., Karpov I., Lepeshev A., Shaihadinov A., Fedorov L.
|
| Volume 11, Nº 5 (2010) |
METHOD OF 3D DIGITALIZATION OF TECHNICAL OBJECTS BASED ON ARTIFICIAL TEXTURES |
(Rus)
|
|
Rutkovskiy V., Rutkovskaya M., Rutkovskiy V., Rutkovskaya M.
|
| Volume 10, Nº 2 (2009) |
ON MATHEMATICAL LINEAR DYNAMIC OBJECT MODELLING |
(Rus)
|
|
Shesterneva O., Maltseva T.
|
| Volume 13, Nº 2 (2012) |
METHOD OF DEVELOPMENT OF STRATEGIC CARD OF THE AIMS OF STABLE DEVELOPMENT OF A MACHINE-BUILDING ENTERPRISE |
(Rus)
|
|
Kuimov V., Levko V., Pimenova M.
|
| Volume 11, Nº 5 (2010) |
FORECASTING METHOD IN CLASS CLASS OF LOGICAL DECISION FUNCTIONS |
(Rus)
|
|
Lbov G., Polyakova G., Lbov G., Polyakova G.
|
| Volume 17, Nº 3 (2016) |
A METHOD TO FORECAST THE RELATIVISTIC ELECTRON FLUX AT GEOSTATIONARY ORBIT |
|
|
Potapov A., Ryzhakova L., Tsegmed B.
|
| Volume 10, Nº 2 (2009) |
PROJECTING METHOD IN PROBLEM OF P ARAMETERS CALCULATING OF REGRESSIVE MUL TIFACTOR-MODEL |
(Rus)
|
|
Mitasov I., Zavyalkin A.
|
| Volume 11, Nº 5 (2010) |
DIRECT STATISTICAL SIMULATION METHOD IN THOMSON'S PROBLEM |
(Rus)
|
|
Kozinkin L., Kozinkin L.
|
| Volume 11, Nº 2 (2010) |
RELIABILITY CALCULATION SPECIALTIESFOR SYSTEMS WITH INDIVIDUAL RESERVING |
(Rus)
|
|
Boyko O., Shaymardanov L., Boyko O., Shaimardanov L.
|
| Volume 14, Nº 1 (2013) |
Airplanes functional systems reliability calculation method |
(Rus)
|
|
Furmanova E., Boyko O.
|
| Volume 23, Nº 2 (2022) |
Method for calculating the optimal geometry of a vortex ejector |
(Rus)
|
|
Kuznetsov V., Makarov V., Shchuka I.
|
| Volume 17, Nº 4 (2016) |
The Method of CALCULATION OF THERMAL STATE OF CHAMBER FOR steady state IMPULSE operation OF LIQUID ROCKET ENGINE OF SMALL THRUST |
|
|
Vorobyev A., Vorobyeva S.
|
| Volume 23, Nº 3 (2022) |
Method for calculating the thermodynamic characteristics of a vortex ejector with known geometric dimensions |
(Rus)
|
|
Kuznetsov V., Makarov V.
|
| Volume 13, Nº 1 (2012) |
METHOD OF EXPANSION OF A RANGE OF MEASUREMENT OF AERODYNAMIC PARAMETERS OF FLIGHT OF A MANEUVERING PLANE |
(Rus)
|
|
Oleynik A.
|
| Volume 12, Nº 4 (2011) |
METHOD FOR SOLUTION OF A PROBLEM OF CALCULATION OF RELIABILITY OF COMPLICATED SYSTEMS WITH VARIABLE PARAMETERS OF BREAKDOWN OF AGGREGATES |
(Rus)
|
|
Shaymardanov L., Boyko O.
|
| Volume 12, Nº 3 (2011) |
COMPLEX SYSTEMS RELIABILITY CALCULATION TASK SOLUTION METHODWITH VARIABLE AGGREGATES BREAKDOWN STREAM PARAMETERS |
(Rus)
|
|
Shaymardanov L., Boyko A., Shaymardanov L., Boyko O.
|
| Volume 11, Nº 3 (2010) |
Methods of image segmentation with the helpof areas growing and multiscale analisys |
(Rus)
|
|
Palamar I., Sizov P.
|
| Volume 16, Nº 3 (2015) |
METHOD FOR THE SYNTHESIS OF AMPLITUDE-PHASE DISTRIBUTION OF HYBRID-MIRROR DOWNLOAD |
|
|
Serenkov V., Kartsan I., Dmitriev D.
|
| Volume 24, Nº 3 (2023) |
The method of Haar sums for numerical solution of kinematic Poisson equations system that determine an evolution of a spacecraft position |
(Rus)
(Eng)
|
|
Kirillov K., Ovchinnikova E., Safonov K., Titov G., Khokhlov A., Gashin A.
|
| Volume 14, Nº 1 (2013) |
Oost accounting method in innovative enterprises of rocket and space industry |
(Rus)
|
|
Zolotareva G., Fedorenko I.
|
| Volume 22, Nº 2 (2021) |
The method of fictitious discrete models in calculations bodies with an inhomogeneous regular structure |
(Rus)
(Eng)
|
|
Matveev A.
|
| Volume 20, Nº 4 (2019) |
The method of equivalent strength conditions in calculating composite structures with a regular structure using multigrid finite elements |
(Rus)
|
|
Matveev A.
|
| Volume 10, Nº 2 (2009) |
METHOD OF EMPIRICAL CATEGORIAL CORRELORAMMS AND ITS APPLICATION |
(Rus)
|
|
Shishov V.
|
| Volume 12, Nº 4 (2011) |
METHOD OF ASSESSMENT OF ACCURACY, QUALITY AND EFFICIENCY OF ABRASIVE FLOW PROCESSING OF SPAIR PARTS |
(Rus)
|
|
Levko V., Lubnin M., Sysoev S., Sysoev A., Sysoeva L.
|
| Volume 12, Nº 5 (2011) |
OLAP-MODELING METHOD OF TERRITORIAL PROGRAMS OF MEDICAL CARE |
(Rus)
|
|
Nozhenkov A.
|
| Volume 19, Nº 2 (2018) |
THE METHOD OF AUTOMATED DEVELOPMENT OF AN ASSEMBLY DRAWING OF A CABLE NETWORK |
(Rus)
|
|
Butin A., Dubrovskiy E., Dobyshev E., Efremov S., Suntsov S.
|
| Volume 15, Nº 2 (2014) |
Information risk management |
(Rus)
|
|
Krasnov I., Karelin O.
|
| Volume 13, Nº 1 (2012) |
PROCEDURE OF ANALYSIS OF RADIO ENGINEERING CHARACTERISTICS OF ONE-REFLECTOR HYBRID-MIRROR ANTENNA WITH THE OFFSET REFLECTOR |
(Rus)
|
|
Lavrov V., Kuzovnikov A., Somov V.
|
| Volume 11, Nº 1 (2010) |
Аpplied method for carrier frequency restoration of telemetry systems signal by digital processing |
(Rus)
|
|
Zaitsev O.
|
| Volume 24, Nº 3 (2023) |
Tool material selection methodology for aircraft elements design |
(Rus)
(Eng)
|
|
Faizullin K., Danilaev M., Polyaev A., Semin N., Rakipov T.
|
| Volume 14, Nº 1 (2013) |
Method of selection of parameters reactive power compensation in traction ac networks |
(Rus)
|
|
Minina A., Panteleev V., Platonova E.
|
| Volume 12, Nº 2 (2011) |
Approach to select of universal vibratory system |
(Rus)
|
|
Semenova L., Lysenko E., Lysenko K., Semenova L., Lysenko E., Lysenko K.
|
| Volume 14, Nº 4 (2013) |
THE TECHNIQUE FOR BINARY EXECUTABLES VULNERABILITIES DETECTION |
(Rus)
|
|
Shudrak M., Zolotarev V., Lubkin I.
|
| Volume 13, Nº 2 (2012) |
METHOD AND CRITERION OF SELECTIVE ASSEMBLY OF WAVE GEAR DRIVES OF SOLAR BATTERIES OF SPACE VEHICLES |
(Rus)
|
|
Prudnikov O., Tyulevin S., Nazarov D.
|
| Volume 18, Nº 4 (2017) |
METHODOLOGY AND PROGRAM COMPLEX OF RESEARCH OF LONGITUDINAL STATIC SUSTAINABILITY OF SCREENPLANE AT THE DESIGN STAGE |
(Rus)
|
|
Vshivkov J., Krivel S.
|
| Volume 16, Nº 2 (2015) |
TOP-DOWN APPROACH FOR SPACECRAFT DEVELOPMENT |
(Rus)
|
|
Lihachev M.
|
| Volume 11, Nº 1 (2010) |
Тechnique of rate making of medium mass of the working body of propulsion installation of the space vehicle in the conditions of uncertainty |
(Rus)
|
|
Tchebotaryov V., Popov V., Valov M., Vnukov А., Shangina E.
|
| Volume 14, Nº 2 (2013) |
THE TECHNIQUE FOR GUARANTEE OF QUALITY OF THE AIRCRAFT DETAIL CHANNELS WITH THE USE OF ABRASIVE FLOW MACHINING PROCESS |
(Rus)
|
|
Sysoeva L., Sysoev S., Sysoev A.
|
| Volume 22, Nº 2 (2021) |
Procedure for determining the acoustic characteristics of combustion chambers of a rocket engine for solid fuel |
(Rus)
(Eng)
|
|
Astahov S., Biruykov V., Sizov G.
|
| Volume 16, Nº 2 (2015) |
DEFINITIONING TECHNIQUE OF SPATIAL POSITION OF NON-DEFORMING CONSTRUCTION OF SPACECRAFT |
(Rus)
|
|
Dorofeev M.
|
| Volume 9, Nº 2 (2008) |
THE METHODS OF ENGINE PS-90A TECHNICAL CONDITION DEFINITION |
|
|
Tolmanov I., Tolmanov A.
|
| Volume 15, Nº 2 (2014) |
Technique of aggregated multivariate models optimization for their application while building the program of checking diagnostic features |
(Rus)
|
|
Nestechuk N.
|
| Volume 9, Nº 2 (2008) |
THE METHODS OF THE PS-90A REPAIRMENT OPTIMIZATION |
|
|
Tolmanov I., Tolmanov A.
|
| Volume 19, Nº 3 (2018) |
PROCEDURE FOR EVALUATING THE EFFECTIVE USE RANGE OF THE UNIFIED SPACE PLATFORMS |
(Rus)
|
|
Chebotarev V., Zimin I.
|
| Volume 10, Nº 4 (2009) |
TECHNIQUE OF AN ESTIMATION OF DIFFERENTIATION AT REGULATION OF SOCIO-ECONOMIC DEVELOPMENT URBAN AGGLOMERATION |
(Rus)
|
|
Anikina Y., Litovchenko V.
|
| Volume 11, Nº 1 (2010) |
Technique of the estimation and forecasting of living standards of the population |
(Rus)
|
|
Shevelyova R.
|
| Volume 11, Nº 4 (2010) |
TECHNIQUE OF AN ESTIMATION OF INVESTMENT APPEAL OF THE ENTERPRISES AND GROUPS OF THE ENTERPRISES |
(Rus)
|
|
Zhukov M., Zhukov M.
|
| Volume 11, Nº 2 (2010) |
TECHNIQUE OF ESTIMATION OF INVESTMENT APPEAL OF A REGION |
(Rus)
|
|
Smirnova E., Zhukov M., Smirnova E., Zhukov M.
|
| Volume 9, Nº 2 (2008) |
TECHNIQUE OF THE ESTIMATION OF THE COMPETITIVE ENVIRONMENT OF THE BRANCH COMMODITY MARKETS |
|
|
Vingert V.
|
| Volume 7, Nº 5 (2006) |
The estimating method of the civil aviation airplanes functional systems reliability with a help of the user's statistic materials |
(Rus)
|
|
Madvedev V., Boyko O., Zosimov A., Shaymardanov L.
|
| Volume 10, Nº 1-2 (2009) |
THE ESTIMATION METHOD OF THE COMPANY MANAGEMENT BASED ON THE ADAPTATIVE CORRELATION TO THE EXTERNAL ENVIRONMENT |
(Rus)
|
|
Masaev S., Dorrer M.
|
| Volume 14, Nº 1 (2013) |
Estimation of the form of a large-sized transformed reflector surface for a spacecraft |
(Rus)
|
|
Goldobin N.
|
| Volume 18, Nº 2 (2017) |
METHODOLOGY OF IMPROVING VIDEO CONFERENCE RELIABILITY |
(Rus)
|
|
Lebedeva K., Lebedev R., Murygin A.
|
| Volume 19, Nº 1 (2018) |
METHODS OF PREPARATION OF THE EXPERIMENT FOR INVESTIGATION OF UNIVERSAL JOINTS ON NEEDLE BEARINGS |
(Rus)
|
|
Eresko S., Eresko T., Kukushkin E., Menovshikov V., Orlov A.
|
| Volume 12, Nº 3 (2011) |
A METHOD OF CALCULATING PROFITS FROM BRITISH-SIBERIANCOMMERCE VIA THE NORTHERN SEA ROUTE 1886-1899 |
(Rus)
|
|
Goncharov A., Goncharov A.
|
| Volume 13, Nº 3 (2012) |
CONSTRUCTION METHOD FOR INFORMATION SECURITY THREAT MODELS OF AUTOMATED SYSTEMS |
(Rus)
|
|
Bondar I.
|
| Volume 16, Nº 1 (2015) |
METHODOLOGY OF PRECISION ADJUSTMENT OF SATELLITE ANTENNAS |
(Rus)
|
|
Dodorin I., Smirnov N.
|
| Volume 7, Nº 5 (2006) |
Forecasting methods of the region economy needs for specialists |
(Rus)
|
|
Sangadiev Z., Skotnikov S., Zhyrnova A.
|
| Volume 16, Nº 1 (2015) |
METHOD OF DESIGNING GEAR DRIVE MECHANISM OF DIFFERENT PURPOSE |
(Rus)
|
|
Vavilov D., Lukin R., Usakov V.
|
| Volume 10, Nº 1-1 (2009) |
Technique of the activity-based management by industrial expensesof the ship-repair enterprises |
(Rus)
|
|
Filko S., Filko I.
|
| Volume 18, Nº 2 (2017) |
METHODS FOR CALCULATING THE TIME CHARACTERISTICS OF THE ELEMENTS OF AN AUTOMATED CONTROL SYSTEM ON THE EXAMPLE OF A CLOSED LOOP FOR REGULATING THE PRESSURE IN A PIPELINE SECTION UNDER THE CONTROL OF THE “OWEN PLC100 220” |
(Rus)
|
|
Kalinin A., Poskonin M., Saramud M., Losev V., Kovalev I.
|
| Volume 13, Nº 4 (2012) |
TECHNIQUE FOR CALCULATION AND SELECTION OF SPACECRAFT ELECTRIC HEATERS PARAMETERS UNDER UNCERTAINTY CONDITIONS |
(Rus)
|
|
Chebotarev V., Zvonar V., Fatkulin R., Dmitriev G.
|
| Volume 10, Nº 3 (2009) |
Technique of account of the budget financing specification of vocationaltraining establishments on the basis of the normative and normalized resource maintenance |
(Rus)
|
|
Khimin E.
|
| Volume 11, Nº 3 (2010) |
Method of calculation of parameters of forest fires,as dynamic processes in the earth surface based on space monitoring data |
(Rus)
|
|
Komorovski V., Dorrer G.
|
| Volume 19, Nº 4 (2018) |
METHOD FOR CALCULATING THE ENERGY CHARACTERISTICS AND SOLAR BATTERY PARAMETERS OF HIGH-VOLTAGE POWER SUPPLY SYSTEMS |
(Rus)
|
|
Chernaya M.
|
| Volume 15, Nº 2 (2014) |
Technique solution of the problem of the pipeline precast structure frequency response search with application of the finite element method |
(Rus)
|
|
Bobarika I., Yakhnenko M.
|
| Volume 17, Nº 3 (2016) |
THE TECHNIQUE OF SYNTHESIS OF REGULATORS TO CONTROL OBJECTS OF THE SECOND ORDER |
|
|
Prokopev A., Ivanchura V., Emelyanov R., Scurihin L.
|
| Volume 20, Nº 1 (2019) |
THE METHOD OF SYNTHESIS OF THE DIGITAL CONTROLLER FOR A SOLAR ENERGY CONVERSION CHANNEL OF THE SOLAR BATTERY IN THE POWER SUPPLY SYSTEM OF A SPACECRAFT |
(Rus)
|
|
Shkolnyi V., Semenov V., Kabirov V., Sukhorukov M., Torgaeva D.
|
| Volume 18, Nº 2 (2017) |
METHODOLOGY OF CREATING MANAGEMENT PROGRAMS FOR CASE PRESSES USED IN THE AVIATION INDUSTRY |
(Rus)
|
|
Pogartseva M.
|
| Volume 11, Nº 1 (2010) |
Metodika upravleniya agentami v mul'tiagentnoy ekspertnoy sisteme |
(Rus)
|
|
Aripova O., Guschin A.
|
| Volume 17, Nº 4 (2016) |
METHODS OF ACCOUNTING FOR AND MONITORING OF THE FIXED ASSETS RENEWAL PROCESS OF ENTERPRISES OF SPACE INDUSTRY |
|
|
Zolotareva G., Bahmareva N., Astapenko E.
|
| Volume 13, Nº 1 (2012) |
METHODOLOGY OF FORMATION OF STRATEGY OF DEVELOPMENT OF MACHINE-BUILDING INDUSTRY IN A REGION OF RAW MATERIAL ORIENTATION |
(Rus)
|
|
Belyakova E., Parfenova S.
|
| Volume 12, Nº 2 (2011) |
Methodof rolled fine pitch spur gear analysis by digital microscope |
(Rus)
|
|
Vavilov D., Iptyshev A., Smirnov A., Eliseev D., Kolegova M., Vavilov D., Iptyshev A., Smirnov A., Eliseev D., Kolegova M.
|
| Volume 13, Nº 3 (2012) |
METHODIC INSTRUMENTS OF CHOOSING INVESTMENT SCHEMES FOR INNOVATION ACTIVITY OF DEFENSE INDUSTRY COMPLEX ENTERPRISES |
(Rus)
|
|
Prokhorov V.
|
| Volume 10, Nº 2 (2009) |
METHODICAL TOOLS AND FORECASTING OF PUBLIC BORROWED CAPITAL EVALUA TION AND FORECASTING FOR INVESTMENT ACTIVITYOF THE INDUSTRIAL ENTERPRISE |
(Rus)
|
|
Prokhorov V.
|
| Volume 10, Nº 2 (2009) |
METHODICAL APPROACHES FOR MONITORING INDUSTRIAL AND MARKETING ACTIVITY OF THE INDUSTRIAL ENTERPRISE |
(Rus)
|
|
Gilts N.
|
| Volume 23, Nº 1 (2022) |
Methodological principles of space vehicle design for the maximum energy sup-ply of the payload |
(Rus)
|
|
Chebotarev V., Fatkulin R., Vorontsova E., Balandina T., Shangina E.
|
| Volume 23, Nº 3 (2022) |
Methodological principles for the formation of a number of unified space communication satellite platforms |
(Rus)
|
|
Chebotarev V., Zimin I., Vnukov A., Shangina E.
|
| Volume 12, Nº 1 (2011) |
METHODOLOGICAL RECOMMENDATIONS ON THE ESTIMATIONOFTHE SUSTAINABLE DEVELOPMENT OFTHE MACHINE BUILDING ENTERPRISES |
(Rus)
|
|
Pimenova M., Pimenova M.
|
| Volume 12, Nº 5 (2011) |
METHODOLOGICAL INSTRUMENTS OF THE FORMATION AND REALIZATION OF MANAGERIAL TECHNOLOGIES OF INNOVATIVE DEVELOPMENT OF REGIONS |
(Rus)
|
|
Belyakova E., Golovenkin E.
|
| Volume 12, Nº 2 (2011) |
Methodical tooling in managementof food industry enterprises |
(Rus)
|
|
Smykalova L., Avramchikova N., Smykalova L., Avramchikova N.
|
| Volume 11, Nº 2 (2010) |
METHODOLOGICAL ASPECTS OF ANALYSIS AND FORECASTOF ECONOMIC SYSTEMS DEVELOPMENT |
(Rus)
|
|
Patsuk O., Patsuk O.
|
| 1101 - 1200 de 2664 resultados |
<< < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 > >> |
