检索

期
标题
作者
卷 90, 编号 2 (2023)
The method of development of the electronic control system for curvilinear motion of a high-speed tracked vehicle with dual-flow transmission
Buzunov N., Ivanenkov V., Pirozhkov R., Kositsyn B., Kotiev G.
PDF
(Rus) PDF
(Eng)
卷 90, 编号 2 (2023)
Motion simulation and calculation of the components of the lateral forces of the guiding wheels of a cotton-harvesting machine
Azimov B., Ikhsanova S.
PDF
(Rus)
卷 90, 编号 1 (2023)
Development and research of a new separating device for a cabbage harvester
Alatyrev A., Emelyanov N., Kruchinkina I., Alatyrev S.
PDF
(Rus)
卷 89, 编号 2 (2022)
Results of the simulation of tracked vehicles ride considering the interaction with a deformable road
Nosov S., Peregudov N.
PDF
(Rus)
卷 91, 编号 1 (2024)
Principles of adaptive control of roll stability of reconfigurable chassis with planetary-wheeled propulsion system
Dobretsov R., Kaninsky A., Popov D., Pryamitsyn I.
PDF
(Rus) PDF
(Eng)
卷 89, 编号 2 (2022)
The Method of Determination of Properties of Air Springs with Two Pressure Stages and Counterpressure
Nakaznoy O., Tsipilev A.
PDF
(Rus)
卷 88, 编号 6 (2021)
Mathematical modeling of the movement of a tracked vehicle using the RecurDyn application package
Poddubnyy V.
PDF
(Rus)
卷 90, 编号 2 (2023)
Increase in performance of air-sieve grain-cleaning machines in separating heap of sunflower seeds
Priporov I.
PDF
(Rus)
卷 89, 编号 1 (2022)
Method for analyzing parameters of single-level pneumatic elastic elements with backpressure
Nakaznoy O., Tsipilev A.
PDF
(Rus)
卷 89, 编号 5 (2022)
The double-flow electromechanical transmission of tracked vehicle
Demidov N., Dobretsov R., Kaninskiy A., Porshnev G.
PDF
(Rus)
卷 77, 编号 4 (2010)
A method of synthesis of multilevel cushioning systems of high-speed caterpillar machines
Kotiyev G., Sarach Y.
卷 83, 编号 4 (2016)
Anti-erosion package-combined tilling and sowing machine for strip tillage on the slope
Samadalashvili A.
PDF
(Rus)
卷 79, 编号 1 (2012)
Machine systems for the production of fuel chips from woody biomass using the full-tree harvesting method
Sukhanov Y., Seliverstov A., Syunev V., Gerasimov Y.
卷 82, 编号 3 (2015)
Method for selection of rational parameters of suspension system of high-speed tracked vehicle
Savochkin V., Sharipov V., Smirnov I., Shishanov S., Tarasova L.
卷 79, 编号 7 (2012)
A closed small-sized pneumatic separator for seed cleaning
Saitov V., Grigoryev D.
卷 78, 编号 10 (2011)
Technological schemes of machines for surface application of several types of mineral fertilizers
Zabrodin V., Ponomarenko I., Tatarkin R.
卷 78, 编号 6 (2011)
Restricting the mobility of high-speed caterpillar machines under the fluctuations of lateral forces
Derzhanskiy V., Taratorkin I.
卷 77, 编号 6 (2010)
Dynamics of vertical movements of a caterpillar machine with rubber-cord tracks
Streltsov V., Lapik V., Mikhalchenkov A., Akimenko D.
卷 86, 编号 4 (2019)
Influence of angular damping coupling on the vibrations of a triaxial two-section non-suspension wheeled vehicle
Novikov V., Pozdeev A.
PDF
(Rus)
卷 87, 编号 1 (2020)
Justification of a new technical solution for the development of potato harvesting machines
Alatyrev S., Kruchinkina I., Alatyrev A.
PDF
(Rus)
卷 85, 编号 1 (2018)
The unification of certain terms and concepts used in the study of land transport-technological vehicles
Parfenov A., Shchetinin Y.
PDF
(Rus)
卷 83, 编号 6 (2016)
Grain loss sensor for pneumatic separation systems of grain-cleaning machines
Zholobov N., Maishev K.
PDF
(Rus)
卷 82, 编号 10 (2015)
Problem of minimization of wheeled vehicle power consumption on external resistance overcoming in case of uneven load distribution between the axles
Keller A., Pozin B., Troyanovskaya I., Bondar V., Yusupov A.
卷 80, 编号 3 (2013)
Simulation testings and modeling of a felling-skidding-processing machine operation in the actual natural conditions
Skrypnik V., Kuznetsov A., Stepanischev O.
卷 80, 编号 11 (2013)
Analytical investigation of critical roll-over speed of wheeled vehicle on tire impact with immobile block
Gorshkov Y., Murog I., Starunova I., Kalugin A.
卷 82, 编号 3 (2015)
To the problem of power distribution between the wheels of mobile machine
Keller A., Pozin B., Troyanovskaya I., Bondar V., Yusupov A.
卷 79, 编号 5 (2012)
Movement of crawler band with elastomer wideners
Abyzov A., Berezin I., Rikhter Y., Byvaltsev V.
卷 78, 编号 10 (2011)
Effective soil separator for potato harvesters
Davidson Y., Dmitriyev D.
卷 78, 编号 1 (2011)
Calculation of radiation protection of the wheeled and caterpillar machines' operator
Gusev S.
卷 77, 编号 5 (2010)
Versatile cabbage harvesting machine
Kostyuchenkova O.
卷 86, 编号 6 (2019)
Development of a method for obtaining a section of reduced stiffness on the elastic characteristic of a vehicle tire
Ryabov I., Pozdeev A., Erontaev V., ZHdamirova E.
PDF
(Rus)
卷 86, 编号 1 (2019)
Frictional steering devices in two-flow transmissions of transport caterpillar vehicles
Demidov N., Dobretsov R., Medvedev M.
PDF
(Rus)
卷 85, 编号 3 (2018)
Modeling the movement control of a wheeled agricultural machine in real time
Nenajdenko A., Poddubnyj V., Valekzhanin A.
PDF
(Rus)
卷 83, 编号 1 (2016)
Determination of diameter of a cutter drum with two-step F-shaped knives
Makhmutov M., Khismatullina Y., Tepikin A., Bykovskiy S., Dzhabbarov A., Alimov A., Makhmutov M.
PDF
(Rus)
卷 82, 编号 9 (2015)
New compact potato harvester with separator acting in ascending and descending manner
Maksimov L., Maksimov P., Strunov A., Bushmakin Y.
卷 80, 编号 1 (2013)
Design procedure of the traction machine full-strength construction by projected service life
Khodes I., Shekhovtsov V., Sokolov-Dobrev N., Kosenko V., Klementyev Y., Godzhayev Z.
卷 80, 编号 9 (2013)
Stability of a wheeled vehicle on turn and on impact with immobile block
Gorshkov Y., Starunova I., Kalugin A.
卷 79, 编号 2 (2012)
Tribological properties of hydraulic cylinders' sealings polymer materials
Borisov V., Kuznetsov V., Vodyakov V.
卷 78, 编号 8 (2011)
Analysis of influence of wheel machine base on the motion stability
Sanzhapov R., Balakina Y.
卷 78, 编号 1 (2011)
The partial accelerations method at mobile machines' dynamics investigation
Artiomov N., Lebedev A., Alekseyev O., Volkov V., Podrigalo M., Polyanskiy A.
卷 77, 编号 7 (2010)
Assessment of radioactivity protection of irradiated machine's operator by the method of circular diagrams
Gusev S.
卷 86, 编号 2 (2019)
Substantiation of the design and technological parameters of the spiral roller for the onion harvesting machine
Sibiryov A., Aksenov A.
PDF
(Rus)
卷 86, 编号 1 (2019)
Road tests of an electromechanical wheel tractor motion control systemctor
Poddubny V., Nenaydenko A., Baybasarov R.
PDF
(Rus)
卷 85, 编号 1 (2018)
Increase in the level of functioning of agricultural tillage machines by justifying the parameters of the column of the working body
Kambulov S., Rykov V., Bozhko I., Kolesnik V.
PDF
(Rus)
卷 83, 编号 3 (2016)
Machines and technologies of entire lands levelling for paddy field
Efremov A., Nasonov S.
PDF
(Rus)
卷 79, 编号 12 (2012)
Ensuring the technological process stability of a helical mixer-spreader for mineral fertilizers
Ponomarenko I., Alkerem M.
卷 80, 编号 5 (2013)
Rotor diameter optimization of a soil cultivating machine
Gadzhiyev P., Makhmutov M., Dzhabbarov A.
卷 81, 编号 3 (2014)
Substantiation of assessment criteria for the suitability of cotton plant varieties to harvesting with vertical spindle cotton pickers
Sadriddinov A., Abdazimov A., Omonov N., Aripova K.
卷 79, 编号 3 (2012)
A mathematical model of soil crumbling by beater drum
Belov M., Gadzhiyev P., Nazarov A., Pakhunova R.
卷 78, 编号 7 (2011)
Electric arc-type stator drive with oscillating action of grain-cleaning machine
Litvin V., Safonov A.
卷 77, 编号 10 (2010)
Structural and technological parameters of scalping machine
Saitov V., Farafonov V.
卷 86, 编号 2 (2019)
Computer simulation of the «engine - working machine» mechanical system
Delyagin V., Dobrolyubov I.
PDF
(Rus)
卷 86, 编号 1 (2019)
The influence of the number of axles of wheeled transport traction machines on rolling resistance
SHilo I., Romanyuk N., Orda A., Kushnir V.
PDF
(Rus)
卷 84, 编号 12 (2017)
The power unit of universal tractors of traction class 1,4 with an integrated starter generator
Bekeev A., Aliev A., Aliev S.
PDF
(Rus)
卷 83, 编号 2 (2016)
Experience and prospects of application of double-drum rotary tillage tools
Zvolinskiy V., Mosyakov M., Semichev S.
PDF
(Rus)
卷 79, 编号 12 (2012)
Efficiency of power part transfer to rotary working organs
Nikitin A.
卷 80, 编号 1 (2013)
Hydraulic vibration separating working organ of a potato harvester
Gordeyev O., Gordeyev V.
卷 81, 编号 7 (2014)
System of rear-view mirrors on a mobile vehicle intended for transmission of one whole image to a driver
Garanin G., Zotov I.
卷 79, 编号 4 (2012)
Laboratory experiment-calculated complex for the investigation of traction and power properties of wheeled mover
Chizhov D., Gorelov V., Kotiyev G.
卷 78, 编号 5 (2011)
Evaluation of sowing machines' reliability according to the operating efficiency index
Yakovlev N.
卷 77, 编号 10 (2010)
A method of economical air speed regulation in the aspiration pneumatic system
Burkov A., Glushkov A.
卷 77, 编号 2 (2010)
Optimal parameters of tops removing working member of cutter for leaf-and-stalk mass
Laryushin N., Laryushin A., Frolov D.
卷 87, 编号 1 (2020)
Tasks and problems of the revival of domestic agricultural engineering
Kolchin N., Zvolinsky V.
PDF
(Rus)
卷 85, 编号 5 (2018)
Prospects for the development of undercarriage systems of modern mobile energy devices for agricultural purposes
Godzhaev Z., Pogozhina A.
PDF
(Rus)
卷 84, 编号 8 (2017)
Field research of a roller-scraper bar machine for harvesting onions
Sibirev A., Aksenov A., Emel'yanov P., Pryamov S.
PDF
(Rus)
卷 83, 编号 2 (2016)
Estimation of use efficiency of automatic transmission of «torque converter - coupling - gearbox» type
Kotiyev G., Vasilyev V., Gorbatovskiy A.
PDF
(Rus)
卷 79, 编号 11 (2012)
Recording system for the investigation of slipping and efficiency coefficient of differential gear and wheeled mover
Gorshkov Y., Chetyrkin Y., Kalugin A.
卷 80, 编号 3 (2013)
Benches for laboratory testings of cabbage harvesters
Toncheva N., Tabakova Y., Alatyrev S.
卷 81, 编号 8 (2014)
Design workflow for load-bearing parts by the example of interaxle differential lock fork of a multiaxial wheeled vehicle
Vdovin D., Kotiyev G.
卷 79, 编号 9 (2012)
Influence of parameters of the diametrical fan's wheel blades on the acoustic characteristics
Sychugov N., Zholobov N.
卷 79, 编号 6 (2012)
A new construction of tree-planting machine
Bartenev I., Shavkov M.
卷 78, 编号 6 (2011)
The application of statistical method to the fractionation of light waste in settling chamber
Saitov V., Farafonov V., Suvorov A.
卷 77, 编号 10 (2010)
Simulation of parameters of the wheeled transport-and-traction vehicle with regard to its use in farm enterprises and in personal subsidiary plots
Zagarin D., Dzotsenidze T.
卷 76, 编号 7 (2009)
Effective characteristics of power plant for the transporting-and-technological machine with energy-accumulating drive
Gryazin V., Zinatullin F., Yakovlev L.
卷 87, 编号 6 (2020)
Factors affecting the change in wheel resistance and track depth of wide-grip sprinkler machines
Zhuravleva L., Tkhuan N.
PDF
(Rus)
卷 85, 编号 3 (2018)
The results determine the acceleration and the mass of the tractor MTZ-80
Arzhenovskiy A., Asaturyan S., Dagldiyan A., Kozlov D., Shchus E.
PDF
(Rus)
卷 84, 编号 7 (2017)
Method for determining the displacement parameters of an agricultural mobile machine
Pavlyuk A., Baranov A.
PDF
(Rus)
卷 83, 编号 4 (2016)
Measurement of tractive effort at the drawbar of tractor in aggregate with mounted agricultural machine
Parkhomenko S., Parkhomenko G.
PDF
(Rus)
卷 79, 编号 11 (2012)
State and trends of development of the tractor industry for Russian forest complex
Bartenev I., Drapalyuk M.
卷 80, 编号 3 (2013)
РСК-2 shrubbery topper
Bychkov V., Shevkun V., Kadykalo G., Kotysko V.
卷 81, 编号 11 (2014)
Indices for efficiency estimation of energy transfer and conversion by transmission and mover of wheeled vehicle
Lepeshkin A.
卷 79, 编号 7 (2012)
Modeling of dynamics of a crawler band with elastomer wideners
Abyzov A.
卷 79, 编号 5 (2012)
A multifunctional soil cultivating resource-saving machine
Kuzmin M.
卷 78, 编号 4 (2011)
A method for calculating the maximum possible level of radiation protection of operator
Gusev S.
卷 77, 编号 12 (2010)
Optimal parameters of drum-type sprinkling machines
Kuznetsov P., Bezrodnov N., Konstantinova T., Novikov A.
卷 76, 编号 6 (2009)
Avtomatizirovannaya sistema upravleniya mekhanizmom povorota gusenichnykh mashin «bortovoy friktsion»
Kotiev G., Adamchuk A., Gorelov V.
卷 87, 编号 4 (2020)
Influence of the shape of potato tubers on the quality of separation into fractions by the working bodies of potato sorting machines
Romanyuk N., Yednach V., Voynash S.
PDF
(Rus)
卷 85, 编号 2 (2018)
Substantiation of constructive and technological parameters of a cylindrical cleaner of soil impurities of onion harvester
Sibirev A., Dorokhov A., Aksenov A.
PDF
(Rus)
卷 83, 编号 6 (2016)
Improvement of agricultural machines reliability by means of controlled tightening
Astakhov M., Nikishkina A.
PDF
(Rus)
卷 80, 编号 2 (2013)
Reliability of machines and equipment used in agriculture
Chibukhchyan S., Stakyan M.
卷 80, 编号 6 (2013)
New bench for cabbage harvesters testing
Alatyrev S., Tabakova Y.
卷 81, 编号 11 (2014)
Improvement of tricycles stability calculation
Mamiti G., Pliyev S., Tedeyev V.
卷 79, 编号 8 (2012)
Evaluation of effectiveness of the wood chips production in timber terminal
Seliverstov A., Gerasimov Y., Sukhanov Y., Syuniov V., Katarov V.
卷 78, 编号 1 (2011)
Distribution of the grain material components on the grid of pneumatic fluidizing device
Saitov V., Suvorov A.
卷 77, 编号 8 (2010)
Optimization of construction of settling vessel for grain cleaning machine
Sychugov N., Korneyev S., Sychugov Y., Skorobogatykh V.
卷 86, 编号 2 (2019)
Determination of the structure park of semitrailed and trailed machines for applying solid mineral fertilizers
Latyshenok M., SHemyakin A., Terent'ev V., Andreev K., Makarov V., ZHuravleva O.
PDF
(Rus)
卷 87, 编号 4 (2020)
Design characteristics of an armored tractor for hot climate
Semenov A.
PDF
(Rus)
卷 85, 编号 5 (2018)
Flexible element in the composition of the working bodies of the rotary soil-cultivating ripping-separating machine
Syromyatnikov Y., Hramov N., Vojnash S.
PDF
(Rus)
卷 83, 编号 8 (2016)
Assessment of model adequacy of the process of grain impurities separation from the fraction of light waste in settling chamber to experimental results
Saitov V., Suvorov A.
PDF
(Rus)
卷 82, 编号 9 (2015)
Increasing soil compacting impact by roller of a combined machine for preplanting cultivation
Akhmetov A.
1 - 100 的 103 信息 1 2 > >> 

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回（例如，隐含AND）
  • 使用OR结合多个检索词，便于查找含有这些检索词的文章，例如education OR research
  • 使用括号来创建更复杂的查询; 例如：archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如： "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如：online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语

##common.cookie##