| 期 |
标题 |
文件 |
| 卷 7, 编号 1-4 (2013) |
Thermal and physical dependence during the granulating of 1-5 mm dispersed particles in liquid nitrogen |
(Rus)
|
|
Belukov S., Kimens P.
|
| 卷 7, 编号 4-2 (2013) |
Terminography as a result of the formation of language for specific purposes |
(Rus)
|
|
Zakirova E.
|
| 卷 8, 编号 4-4 (2014) |
Thermoviscoplastic cyclic deformation and fracture of materials |
(Rus)
|
|
Bondar V., Danshin V.
|
| 卷 6, 编号 2-4 (2012) |
Thermodynamics in weakly-dissipative Kolmogorov-Arnold-Moser theory |
(Rus)
|
|
Bogdanov R., Bogdanov M., Baranov M.
|
| 卷 14, 编号 2 (2020) |
Thermodynamic similar indicator diagrams of the heat engines Energy non-dimensional diagram of the heat engine closed cycle |
(Rus)
|
|
Kalnitskiy F., Morozov D., Tatarov M., Fedulov A.
|
| 卷 7, 编号 3-2 (2013) |
Thermochemical conversion and composite sorbents for petroleum products based on blends of cellulose-containing and polymer waste of packaging |
(Rus)
|
|
Skopintsev I., Meleshkina A., Myasoyedova V.
|
| 卷 2, 编号 2 (2008) |
Thermoemission Properties of Alloys on the Basis of Refractory Metals |
(Rus)
|
|
Arzamasov V., Smirnova E., Polunov I., Rykov D., Stroyev A.
|
| 卷 7, 编号 3-2 (2013) |
Test installation to determine parameters of superposition modes of lighting of phototrophic microorganisms |
(Rus)
|
|
Zubov D., Makeev P., Maltsevskaya N.
|
| 卷 14, 编号 3 (2020) |
Technical and economic analysis of the efficiency of a low-power wind farm in the climatic conditions of the center of the European part of Russia |
(Rus)
|
|
Jinov A., Shevelev D., Metlitsky N.
|
| 卷 16, 编号 1 (2022) |
Technical electrogenerating tools for road facilities: systematics and design specifics |
|
|
Lyashenko Y., Prudiy A.
|
| 卷 16, 编号 3 (2022) |
Technical diagnostics of heembedded elements of crane tracks of lifting equipment in machine halls of tunnel escalators |
|
|
Vatulin Y., Popov V., Dyatlov V.
|
| 卷 7, 编号 4-2 (2013) |
Technologies of political management in party-building in Russia |
(Rus)
|
|
Fedorchenko S., Rybina M.
|
| 卷 7, 编号 3-2 (2013) |
Technology for biodiesel production |
(Rus)
|
|
Sister V., Ivannikova E., Yamchuk A.
|
| 卷 7, 编号 4-1 (2013) |
Technological platform as an innovative tool for industry’s crisis recovery |
(Rus)
|
|
Trishkin A.
|
| 卷 4, 编号 1 (2010) |
Technological Measures to Improve Automotive Product Quality |
(Rus)
|
|
Gladkov V., Kruglov S.
|
| 卷 13, 编号 1 (2019) |
Flow diagrams for tribological testing of transport engineering units |
(Rus)
|
|
Glazunov D.
|
| 卷 7, 编号 1-2 (2013) |
Technological synthesis of mechatronic machine-tool systems for multi-axis machining |
(Rus)
|
|
Lukina S., Ivannikov S., Krutyakova M., Manaenkov I.
|
| 卷 2, 编号 2 (2008) |
Technological Quality Assurance of Assembling |
(Rus)
|
|
Medar A.
|
| 卷 1, 编号 2 (2007) |
Technological Solutions for Operational Imbalance of Turbines Flexible Rotors |
(Rus)
|
|
Korneev N.
|
| 卷 8, 编号 3-1 (2014) |
HIL-simulation as an instrument for elaboration of automotive drivetrains with wheels torques distribution |
(Rus)
|
|
Kulikov I.
|
| 卷 7, 编号 2-2 (2013) |
Technology of upsetting process for parts with rectangular head and spherical radius |
(Rus)
|
|
Glazunov D., Kalpin J., Molodov A., Filippov J.
|
| 卷 7, 编号 2-2 (2013) |
The technology of precision tubular products using compression on the profile mandrel rolling-drawing non-driven rollers |
(Rus)
|
|
Rozov J.
|
| 卷 5, 编号 2 (2011) |
Technology of Threading of High-length Threads |
(Rus)
|
|
Timiryazev V., Khostikoev M., Chertov F.
|
| 卷 7, 编号 4-2 (2013) |
Technology of organization of students independent work in conditions of interdisciplinary integration |
(Rus)
|
|
Aslamova T., Bagramiants N.
|
| 卷 6, 编号 1 (2012) |
MANAGEMENT TECHNOLOGY FOR DEVELOPMENT OF A SYSTEM FOR EVALUATION OF THE QUALITY OF EDUCATIONAL PROCESS AT UNIVERSITY |
(Rus)
|
|
Belova S.
|
| 卷 5, 编号 2 (2011) |
Tekhnologiya uprochneniya poverkhnosti putem sozdaniya neodnorodnoy struktury pri azotirovanii v tleyushchem razryade |
(Rus)
|
|
Ramazanov K., Agzamov R.
|
| 卷 9, 编号 4-5 (2015) |
Technopark as an element of development of innovative activity |
(Rus)
|
|
Shaposhnikova A., Viazemtsova E., Alenin I.
|
| 卷 7, 编号 3-1 (2013) |
Fluid flow in a cylindrical porous frame with regard to the Darcy type interactive forces and frontal pres |
(Rus)
|
|
Faskheev I.
|
| 卷 8, 编号 3-4 (2014) |
Flow of thin layer of plastically anisotropic material on face of elastic parallelepiped |
(Rus)
|
|
Bodunov M., Borodin I., Kiyko L.
|
| 卷 7, 编号 1-3 (2013) |
The flow of thin layer of plastic anisotropic material on the surface of elastic half-space |
(Rus)
|
|
Bodunov M., Bodunov D., Borodin I.
|
| 卷 6, 编号 1 (2012) |
TYPOLOGICAL ANALYSIS APPLIED RESEARCH TALENT |
(Rus)
|
|
Ivleva M., Inozemtsev V.
|
| 卷 9, 编号 4-5 (2015) |
Commodity market of Russia: the quality, competitiveness and management |
(Rus)
|
|
Alenina E., Iliin A., Ziulina V.
|
| 卷 9, 编号 4-5 (2015) |
Fuel and energy complex of Russia: innovative features and solutions |
(Rus)
|
|
Pogrebniak R., Shedko U.
|
| 卷 6, 编号 2-4 (2012) |
Fuel converter for an internal combustion engine |
(Rus)
|
|
Goncharov D., Belyaevsky M.
|
| 卷 6, 编号 2-1 (2012) |
The fuel pump of a new generation |
(Rus)
|
|
Maksimov Y., Sokovikov V., Bekaev A., Strokov P.
|
| 卷 12, 编号 2 (2018) |
Topological optimization of the automobile bumper design under impact from the passive safety standpoint |
(Rus)
|
|
Goncharov R., Zuzov V.
|
| 卷 15, 编号 1 (2021) |
Topological optimization of the roof structure of a passenger car in order to increase energy intensity in a side impact |
(Rus)
|
|
Sulegin D., Zuzov V.
|
| 卷 17, 编号 2 (2023) |
Topological optimization of the load-bearing structure of the safety cage |
|
|
Zhitelev D., Pozdnyakov T., Sulegin D.
|
| 卷 2, 编号 2 (2008) |
Topological Presentation of Assemblies and Their Analysis with Tolerance Measuring |
(Rus)
|
|
Gayer M., Plonsky P.
|
| 卷 7, 编号 3-1 (2013) |
Exact solution of Cauchy problem for Harrod Domar differential equation model with variable coefficient of incremental capital-output ratio |
(Rus)
|
|
Meyerson A., Chernyaev A.
|
| 卷 14, 编号 2 (2020) |
Electromechanical transmission for tractors and road-building machinery |
(Rus)
|
|
Porshnev G., Dobretsov R., Krasilnikov A.
|
| 卷 7, 编号 4-1 (2013) |
Transparency as a key component of the information space of an enterprise |
(Rus)
|
|
Rozhnova O., Igumnov V.
|
| 卷 7, 编号 1-5 (2013) |
Transparency as a priority direction of improving the quality of enterprises reporting |
(Rus)
|
|
Rozhnova O., Markov V., Igumnov V.
|
| 卷 8, 编号 1-3 (2014) |
Traffic jams in conditions of megapolis |
(Rus)
|
|
Vladimirov S.
|
| 卷 10, 编号 2 (2016) |
The transport robot with reconfigurable structure |
(Rus)
|
|
Rachkov M.
|
| 卷 8, 编号 3-5 (2014) |
Transformation of kinds of computer representation of information in evolution of algorithmic programming languages |
(Rus)
|
|
Inozemtsev V.
|
| 卷 9, 编号 1-4 (2015) |
The requirements of modern methods of calculating reserves for static strength to mechanical and strength characteristics of liquid-propellant rocket materials |
(Rus)
|
|
Vladimirov S., Kondratenko M.
|
| 卷 8, 编号 3-4 (2014) |
Tribological characteristics of lubricating oil with nanodispersed phase |
(Rus)
|
|
Bolotov A., Novikov B., Novikova O., Rachishkin A., Gorlov D.
|
| 卷 9, 编号 1-4 (2015) |
Tribological tests of solid lubricating coatings at elevated temperatures and loads |
(Rus)
|
|
Sutyagin O., Bolotov A., Rachishkin A.
|
| 卷 8, 编号 1-2 (2014) |
Tribological characteristics of dispersed-filled composite materials |
(Rus)
|
|
Pechnikov A., Toleshuli A., Meshcheryakov E.
|
| 卷 4, 编号 1-4 (2014) |
Trigonometric probability distribution |
(Rus)
|
|
Ivashnev L.
|
| 卷 6, 编号 2-1 (2012) |
Turbo fan for intercooling system of transport turbodiesel engine |
(Rus)
|
|
Andreenkov A.
|
| 卷 6, 编号 2-1 (2012) |
Turbo-electric compressor: potential, design and prospects |
(Rus)
|
|
Kaminskiy V., Lazarev A., Kaminskiy R., Sibiryakov S.
|
| 卷 9, 编号 4-5 (2015) |
Turbulence in the corporate structure as a factor of downfall in their competitiveness |
(Rus)
|
|
Nosova S., Abdulov R., Medvedeva U.
|
| 卷 17, 编号 1 (2023) |
Towing couplers of a multi-sectional vehicle |
|
|
Popov I.
|
| 卷 8, 编号 4-1 (2014) |
Carbon materials for parts of gas-turbine engines and internal combustion engines, problems and prospects |
(Rus)
|
|
Pyatov I., Shiboev O., Buzinov V., Makarov A., Kostyukov A., Posedko V., Finkelberg L., Kostyuchenkov A.
|
| 卷 2, 编号 2 (2008) |
Improvement of Geometrical Parameters of Surface Quality in Process of Broaching on the Basis of Modernization of Cutting Tool Design |
(Rus)
|
|
Bekayev A., Shchedrin A., Skoromnov V.
|
| 卷 7, 编号 1-1 (2013) |
Improving of starting characteristics of petrol-ethanol internal combustion engines during cold start and warm-up |
(Rus)
|
|
Lavrov S., Abramov A.
|
| 卷 8, 编号 1-3 (2014) |
Improving of motor vehicles performance through use of high-performance additives |
(Rus)
|
|
Zarubin V., Kiselev V., Puchkov P., Toporov A.
|
| 卷 16, 编号 2 (2022) |
Improving the energy and environmental performance of a diesel internal combustion engine by using a hydrogen-containing additive |
|
|
Dunin A., Shabanov A., Nguyen T., Shatrov M., Golubkov L.
|
| 卷 2, 编号 2 (2008) |
Improvement of Ecological and Energy Indexes of FWD Vehicles with Hydrostatic Transmission due to the Optimal Development of Electronic Control System |
(Rus)
|
|
Kurmaev R., Malkin M.
|
| 卷 7, 编号 2-1 (2013) |
Enhancement of energy and environmental performance of reciprocating internal combustion engines on transition to gasoline-ethanol fuel |
(Rus)
|
|
Abramov A., Apelinskiy A., Runovskiy K., Belov V.
|
| 卷 2, 编号 1 (2008) |
Ultrasound Sudies of Ball Elements of Bearing Assemblies |
(Rus)
|
|
Brazhkin Y., Sovetskaya E.
|
| 卷 14, 编号 4 (2020) |
Reduced rutting of wide-grip sprinklers |
(Rus)
|
|
Zhuravleva L., Tkhuan N.
|
| 卷 8, 编号 3-3 (2014) |
Universal algorithm of preparation of soil samples for determination of hazardous chemicals |
(Rus)
|
|
Latyshenko K., Mironov A., Pavluchenko I.
|
| 卷 6, 编号 2-1 (2012) |
Universal test bench for elastic behavior control of pressure plate of a ready-assemble clutch |
(Rus)
|
|
Petunin V., Prokopiev M., Prasolov A., Volkov D., Trankvilevskiy V.
|
| 卷 3, 编号 2 (2009) |
Universitetskoe obrazovanie. Istoricheskiy opyt i sovremennye podkhody |
(Rus)
|
|
Maksimovskikh L.
|
| 卷 7, 编号 3-2 (2013) |
Control of gas exchange during cultivation of phototrophic microorganisms |
(Rus)
|
|
Makeev P., Biryukov V., Arkhipov M., Stekhnovskaya L.
|
| 卷 9, 编号 2-1 (2015) |
Control of a diesel-generator set of a heavy truck in transient conditions |
(Rus)
|
|
Fomin A.
|
| 卷 1, 编号 2 (2007) |
Inventory Management of Spare Parts and Accessories Using Information Technologies |
(Rus)
|
|
Antipenko V., Galkin K., Sharipova E., Bezrukov A.
|
| 卷 9, 编号 3-5 (2015) |
Cost management in foreign enterprises |
(Rus)
|
|
Nazarkova E., Sekerin V.
|
| 卷 7, 编号 4-1 (2013) |
Innovation management in companies in a socially-oriented market economy |
(Rus)
|
|
Umrikhina M.
|
| 卷 9, 编号 4-5 (2015) |
Problems of training competitive human capital on the stage of its design |
(Rus)
|
|
Koltsova E., Bobovich B.
|
| 卷 7, 编号 2-2 (2013) |
Quality management of technical products in the development stage of working documents |
(Rus)
|
|
Martishkin V.
|
| 卷 7, 编号 2-2 (2013) |
Quality management of technical products at the stage of technical projec |
(Rus)
|
|
Martishkin V.
|
| 卷 6, 编号 1 (2012) |
QUALITY MANAGEMENT OF TECHNICAL PRODUCTS ON THE STAGES OF DEVELOPMENT |
(Rus)
|
|
Martishkin V.
|
| 卷 3, 编号 2 (2009) |
Inventory management at the machine-building enterprises from the position of logistics |
(Rus)
|
|
Ionov V., Makarenko S.
|
| 卷 4, 编号 2 (2010) |
Control of vehicle front suspension loading by choosing efficient angle of the rolling plane for a steering wheel |
(Rus)
|
|
Balabin I., Nadezhdin V., Lukyanov M., Rybakova M.
|
| 卷 17, 编号 4 (2023) |
Load mode control of test rigs for rubber-metal vibration isolators |
|
|
Godzhaev Z., Shekhovtsov V., Lyashenko M., Potapov P., Klementiev E.
|
| 卷 7, 编号 3-2 (2013) |
Reliability and risk management in the system of experts decision-making |
(Rus)
|
|
Bondar V.
|
| 卷 2, 编号 2 (2008) |
Control of Machinery Quality Parameter Inheritance during restoration, working, assembly and operation of machinery |
(Rus)
|
|
Heyfets M., Lysov A., Kusakin N., Prement G.
|
| 卷 8, 编号 1-2 (2014) |
Management of normative-technical information at mechanical engineering enterprises |
(Rus)
|
|
Krakovtsev V., Petrova T.
|
| 卷 8, 编号 3-5 (2014) |
Management of current assets of automobile dealer center in the new economy |
(Rus)
|
|
Kondratova S., Umrikhina M.
|
| 卷 2, 编号 2 (2008) |
Risk and Reliability Management for Motor Transport on the Basis of Monitoring of Features of Operating Vehicles |
(Rus)
|
|
Komarov V.
|
| 卷 7, 编号 4-1 (2013) |
Risk management in innovative projects in automotive industry |
(Rus)
|
|
Sharyan E., Tkacheva O.
|
| 卷 9, 编号 3-5 (2015) |
Management of strategic sustainability of energy sector corporations in conditions of transformation |
(Rus)
|
|
Gridchina A.
|
| 卷 3, 编号 2 (2009) |
Motor Transport Systems Sustainability Management Based on Safety and Effectiveness Criteria |
(Rus)
|
|
Komarov V., Narbut A.
|
| 卷 7, 编号 1-5 (2013) |
Management of formation industrial enterprises comprehensive strategy of innovative development |
(Rus)
|
|
Semenova V., Petrosyan D.
|
| 卷 3, 编号 1 (2009) |
Controllability and Stability in Macroeconomic System |
|
|
Katanaev N., Arkatova N., Bаsanets P.
|
| 卷 7, 编号 1-2 (2013) |
Hardening of surfaces by physical and chemical method of coating |
(Rus)
|
|
Shandrov B., Filippov V., Khomyakova N., Volkov S.
|
| 卷 9, 编号 3-5 (2015) |
Trade facilitation in modern global economy |
(Rus)
|
|
Strelnikova E., Zenkina E.
|
| 卷 7, 编号 1-2 (2013) |
Elastic bending of a bimetallic sheet |
(Rus)
|
|
Tipalin S., Shpunkin N., Kolesov A.
|
| 卷 7, 编号 1-4 (2013) |
Elasto-plastic calculation of tubular elements of constructions |
(Rus)
|
|
Lugantsev L., Koscheyev E.
|
| 卷 7, 编号 1-3 (2013) |
The equations of the loading process of shallow cylindrical shells under bilateral compression |
(Rus)
|
|
Volodin V., Nadirov E.
|
| 卷 10, 编号 4 (2016) |
Balancing of three-cylinder engine through the action of reactive torque |
(Rus)
|
|
Gusarov V., Ashishin A.
|
| 卷 9, 编号 3-4 (2015) |
Supplementary stress method convergence rate acceleration |
(Rus)
|
|
Lazarev A.
|
| 卷 6, 编号 1 (2012) |
CONDITIONS NECESSARY FOR THE DEVELOPMENT OF SMALL INNOVATIVE BUSINESSES IN RUSSIA |
(Rus)
|
|
Gribov V., Kamchatnikov G.
|
| 卷 8, 编号 4-2 (2014) |
Improvement of technology of manufacturing "body pump" parts of EPAN composite material reinforced by nanoscale carbon fibers |
(Rus)
|
|
Kostikov V., Eremeeva Z., Nitkin N., Sharipzyanova G., Slyuta D.
|
| 卷 8, 编号 1-5 (2014) |
Enhanced algorithm for gear calculation for justified selection of materials of gears and wheels |
(Rus)
|
|
Lukyanov A., Starikov A.
|
| 卷 7, 编号 1-3 (2013) |
Steady viscous fluid flow at pipe entrance |
(Rus)
|
|
Vyskrebtsov V.
|
| 2201 - 2300 的 2506 信息 |
<< < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 > >> |
