检索

Comparative analysis of edge detection methods for lines search on the basis of Hough transform method

Zotin A., Borisov Y., Lisitsa A.

(Rus)

卷 20, 编号 2 (2019)

Investigation of the metrological characteristics of the PulsESPI system applied to the precision inspection of thermal deformations

Zavyalov P., Kravchenko M., Urzhumov V., Kuklin V., Mikhalkin V.

(Eng)

SINGLE-FREQUENCY METHOD SIMULATION FOR DETERMINation of VERTICAL IONOSPHERIC SIGNAL DELAY

Kurnosov A., Fateev Y.

(Rus)

卷 21, 编号 3 (2020)

Simulation of the induction soldering process of waveguide paths from aluminum alloys

Bocharova O., Murygin A., Bocharov A., Zaitsev R.

(Eng)

卷 22, 编号 3 (2021)

Dependence of the degree of water purification on the specific amount of electricity and the definition time

Shestakov I., Khilyuk A.

(Rus)

(Eng)

卷 23, 编号 1 (2022)

Investigation of the stress state and assessment of the stability of an anisogrid cylindrical shell when changing the parameters of the rib structure under static loading

Lidiya M., Burnysheva T.

(Rus)

卷 21, 编号 2 (2020)

Investigation of the metrological characteristics of the PulsESPI system applied to the precision inspection of thermal deformations

Zavyalov P., Kravchenko M., Urzhumov V., Kuklin V., Mikhalkin V.

(Eng)

卷 23, 编号 4 (2022)

Magnetic properties of M_n1–xGd_xSe solid solutions

Zhivulko A., Yanushkevich K., Danilenko E., Zelenov F., Bandurina O.

(Rus)

卷 24, 编号 2 (2023)

Conservative semi-Lagrangian method for continuity equation with various time steps in different parts of computational domain

Vyatkin A., Maltsev A.

(Rus)

卷 21, 编号 1 (2020)

Influence of a constant electric field on the adsorption purification of water from iron ions

Shestakov I., Khilyuk A.

(Eng)

卷 23, 编号 3 (2022)

Modeling and verification of working process parameters in gas generators for pressurizing fuel tanks of liquid propellant rocket propulsion systems

Sheludko M., Nazarov V., Zenyuk K., Nazarova L.

(Rus)

卷 12, 编号 5 (2011)

MATHEMATICAL AND NUMERICAL MODELLING OF CURRENTS OF VISCOUS THERMALLY CONDUCTIVE GAS

Shchepanovskaya G.

(Rus)

卷 12, 编号 2 (2011)

Short-term forecasting of mining enterprise energy demand by univariate methods

Val' P., Val P.

(Rus)

卷 11, 编号 2 (2010)

RESEARCH OF SEMIMARKOVIAN PROCESS IN CONDITIONSOF LIMIT RARE CHANGES OF ITS STATES

Gorbatenko A., Nazarov A., Gorbatenko A., Nazarov A.

(Rus)

卷 18, 编号 4 (2017)

SYSTEM APPROACH OF SELECTION TO PURPOSE DESIGNED EQUIPMENT OF SMALL SPACECRAFT

Kaloshin I., Kharlamov A., Skripachev V., Surovceva I., Ivanov V.

(Rus)

NUMERICAL COMPUTATIONS FOR ARTIFICIAL EARTH SATELLITE POSITION UNDER RESTRICTIONS ON MEASUREMENTS ERRORS

Rogalyov A., Rogalyov A.

(Rus)

卷 10, 编号 2 (2009)

COMPARATIVE ANALYSIS OF APPROACHES TO THE ESTIMATION OF THE ENTERPRISES INVESTMENT APPEAL

Anischenko J., Logacheva I.

(Rus)

卷 18, 编号 4 (2017)

NUMERICAL AND STATISTICAL METHOD FOR SOLVING THE HEAT EXCHANGE PROBLEMS IN THE HEAT-PROTECTIVE CONSTRUCTIONS OF THE HONEYCOMB TYPE

Gusev S., Nikolaev V.

(Rus)

NUMERICAL ANAL YSIS OF THE PROCESS OF PUNCHING SHEAR OF A SOIL

Kuzovatova O., Sadovskii V.

(Rus)

卷 15, 编号 1 (2014)

Analysis of shear flexible beam with both clamped ends by Ritz method

Nesterov V.

(Rus)

卷 11, 编号 3 (2010)

Optical measuring systems and laser technologies for industrial applications

Chugui Y.

(Rus)

卷 17, 编号 1 (2016)

CAD SYSTEM FOR PERSPECTIVE POWER SUPPLY NETWORK DEVELOPMENT TASK SOLUTION

Kuzmina I.

卷 15, 编号 5 (2014)

Modeling of complex processes using autoregressive methods

Gorodov A., Gorodova L., Kuznetsov A.

(Rus)

THE CONSTRUCTION OF PROBABILISTIC RELIABILITY MODELS ON THE BASIS OF CURRENT STATUS DATA

Chimitova E.

(Rus)

Mathematical methods used to assess the position and form accuracy of a large-sized spacecraft reflector

Goldobin N.

(Rus)

卷 11, 编号 3 (2010)

Stiffness matrix of the tridimentional beam finite element with low transverse shear stiffness

Nesterov V.

(Rus)

ON FEEBLE SOLUBILITY OF MIXED PROBLEM FOR NONLINEAR EQUATION WITH PSEUDO-PARABOLIC OPERATOR OF HIGH DEGREE

Yuldashev T.

(Rus)

卷 16, 编号 2 (2015)

GREEDY HEURISTIC METHOD FOR LOCATION PROBLEMS

Kazakovtsev L., Antamoshkin A.

(Rus)

Application of hermitian biquadratic finite element

Shaydurov V., Shut S.

(Rus)

卷 15, 编号 3 (2014)

Data mining tools for prospective students’ success rate prediction

Akhmedova S., Vishnevskaya S., Koromyslova A.

(Rus)

卷 14, 编号 3 (2013)

DEVELOPMENT OF COMPOSITE PRECISION SATELLITE REFLECTOR: FINITE ELEMENT CONSTRUCTION MODELING

Lopatin A., Pasechnik K., Vlasov A., Shatov A.

(Rus)

卷 17, 编号 3 (2016)

THE TECHNIQUE OF SYNTHESIS OF REGULATORS TO CONTROL OBJECTS OF THE SECOND ORDER

Prokopev A., Ivanchura V., Emelyanov R., Scurihin L.

AXIAL BALL STRAIN INFLUENCE ON MEASURABLE VALUE OF BALL INDENTATION BY TOP POINT OF BALL

Avtonomov N., Tololo A.

卷 11, 编号 3 (2010)

Determination of the fundamental frequency for rectangular sandwichplate with free edge

Lopatin A., Deev P.

(Rus)

卷 12, 编号 4 (2011)

DEVELOPMENT OF MATHEMATICAL MODELS OF DYNAMICS AND ESTIMATION OF FATIGUE LIFE OF TURBOMACHINES BLADES WITH ACCOUNT OF GEOMETRIC NONLINEARITY

Rеpetskiy O., Bui M.

(Rus)

卷 10, 编号 2 (2009)

PROJECTING METHOD IN PROBLEM OF P ARAMETERS CALCULATING OF REGRESSIVE MUL TIFACTOR-MODEL

Mitasov I., Zavyalkin A.

(Rus)

卷 16, 编号 4 (2015)

Numerical simulation of electron-beam welding with a longitudinal oscillation of the beam based on the experimental determination of the keyhole form

Permyakov G., Trushnikov D., Belenkiy V., Olshanskaya T.

卷 15, 编号 4 (2014)

Annex of the variation and differential method for calculation of the longitudinally cross bend of plates by inertia forces

Sabirov R.

(Rus)

Technique solution of the problem of the pipeline precast structure frequency response search with application of the finite element method

Bobarika I., Yakhnenko M.

(Rus)

卷 14, 编号 2 (2013)

NUMERICAL RESEARCH OF METHODS FOR MULTIDIMENTIONAL SOLITONS SEARCH

Savenkova N., Laponin V.

(Rus)

Calculation of eigenvalues in the problem of unsteady heat transfer through a cylindrical wall with mixed boundary conditions

Vidin Y., Ivanov D.

(Rus)

卷 18, 编号 4 (2017)

MODELING OF THE TRANSFORMABLE MECHANICAL SYSTEMS

Ruchkin L., Ruchkina N.

(Rus)

卷 17, 编号 2 (2016)

APPLICATION OF SENSITIVE FUNCTIONS, WHICH USED TO COMPUTE TUBES INCLUDING THE TRAJECTORIES OF CONTROL SYSTEMS

Rogalyov A.

NUMERUCAL SIMULATION OF THE CESIUM CYCLEIN THE UPPER ATMOSPHERE BY MEANS OF L -STABLE METHODOF THE SECOND ORDER OF ACCURACY

Novikov A., Novikov E.

(Rus)

USAGE OF METHODS OF MULTI-DIMENTIONAL DATA PROCESSING FOR ANALYSIS OF ENERGY CONSUMPTION OF ALUMINUM REDUCTION CELLS

Piskazhova T., Polyakov P., Sharypov N.

(Rus)

卷 12, 编号 1 (2011)

ABOUT CONNECTION OF POINT REPRESENTATIONSOF FUNCTIONSAND THEIR LAPLACE TRANSFORMS

Osipov V., Osipov V.

(Rus)

卷 11, 编号 5 (2010)

VIBRATION OF A PLATE WITH LOW TRANSVERSE SHEAR STIFFNESS

Nesterov V., Nesterov V.

(Rus)

卷 16, 编号 4 (2015)

CONCEPTIONAL APPROACH AND MANAGEMENT TECHNIQUE TO MANAGE RISKS OF INNOVATIONS IN THE SPACE INDUSTRY

Mikhin P., Antamoshkin A., Antamoshkina E.

卷 15, 编号 1 (2014)

Methodological approach to risk management at the enterprises of the rocket and space industry

Tovstonoshenko V.

(Rus)

To calculation of plates in the conditions of the flat tension on temperature loadings with the help of the variation and differential method in tension functions

Sabirov R.

(Rus)

卷 14, 编号 4 (2013)

THE CHOICE OF THE ACTIVE SPACE FOR MULTICONFIGURATIONAL SELF-CONSISTENT-FIELD IN THE DESCRIPTION OF THE METALLOPROTEINES ACTIVE SITES

Lykhin A., Kuzubov A., Varganov S., Serzhantova M., Eliseeva N.

(Rus)

卷 14, 编号 3 (2013)

STIFFNESS OF THE SANDWICH PANEL WITH FREE EDGE AS A CONSTRUCTIONAL PART OF A SPACECRAFT

Lopatin A., Deev P., Rutkovskaya M.

(Rus)

卷 14, 编号 2 (2013)

A NONPARAMETRIC MODEL IN THE TASK OF PREDICTIVE MODELING OF WIND POWER PLANTS

Agafonov E., Mangalova E., Shesterneva O.

(Rus)

卷 17, 编号 2 (2016)

COMBINING CLUSTERING AND CLASSIFICATION APPROACHES FOR SPEECH-BASED EMOTION RECOGNITION PROBLEM

Polyakova A., Sidorov M., Semenkin E.

A NEW FAST FACE DETECTION TECHNIQUE

Mamdouh M. Gomaa -.

卷 11, 编号 6 (2010)

STUDY OF SHIELDING MATERIALS COUPLING RESISTANCE

Vlasov A., Bol'shakov D., Avakumov R., Vlasov A., Bolshakov D., Avakumov R.

(Rus)

AUTOMATIC DEVICE FOR MEASURING RESISTIVITY OF SILICON FOUR-POINT PROBE METHOD

Vladimirov V., Grinin E., Sergiy M., Shepov V.

(Rus)

DETERMINATION OF VIBRATIONS DOMINANT MODE OF AN ORTHOTROPIC PLATE FASTENED TO THE BEDDING ANGLES

Lopatin I.

(Rus)

卷 12, 编号 2 (2011)

Finite element analysis of sandwich beam

Nesterov V., Nesterov V.

(Rus)

卷 11, 编号 2 (2010)

EXPRESS-ESTIMATION OF BUSNESS VALUE FOR MAKINGTACTICAL DICISIONS IN MANAGEMENT OF ENTERPRISES

Porotova O., Yankina I., Smirnova E., Porotova O., Yankina I., Smirnova E.

(Rus)

卷 16, 编号 2 (2015)

ASSESSMENT OF LOGISTICAL potential OF THE ENTERPRISE OF ROCKET-SPACE INDUSTRY ON THE BASIS OF INDICATOR METHOD

Belyakova E.

(Rus)

卷 15, 编号 5 (2014)

Indicators for assessing the effectiveness of innovation investment projects of high-tech industries

Smorodinov R., Smorodinova N.

(Rus)

卷 15, 编号 1 (2014)

Study of characteristics of vibrations of mistuned bladed disks of turbomachines on the basis of reduced-order modeling by finite element method

Repetskiy O., Do Manh Tung -.

(Rus)

Oost accounting method in innovative enterprises of rocket and space industry

Zolotareva G., Fedorenko I.

(Rus)

Modal finite element analysis of shear flexible beams

Nesterov V.

(Rus)

卷 19, 编号 3 (2018)

INCREASING THE ACCURACY OF THE CONTACT METHOD OF MEASURING THE CURRENT SQUARE OF CRYSTALS GROWN BY THE WAY OF THE CZOHRALSKY

Sahansky S., Yulenkov S.

(Rus)

卷 18, 编号 1 (2017)

DETERMINATION OF THE FUNDAMENTAL FREQUENCY OF A SANDWICH PANEL AS CONSTRUCTIONAL PART OF SPACECRAFT BODY

Deev P., Sinkovskiy F.

(Rus)

卷 17, 编号 3 (2016)

CALCULATION OF COMPOSITE CYLINDRICAL SHELLS USING MULTIGRID ELEMENTS

Matveev A., Grishanov A.

FUNDAMENTAL FREQUENCY DETERMINATION FOR SANDWICH PLATE SIMPLY SUPPORTED IN FOUR CORNERS

Deev P., Lopatin A.

(Rus)

卷 11, 编号 6 (2010)

FEATURES OF SIMULATION OF PROCESS OF SEMICONTINUOUSEXTRUSION OFALUMINUMALLOYS

Gubanov I., Belyaev S., Shirokov V., Salatov A., Maslov I., Gubanov I., Belyaev S., Shirokov P., Salatov A., Maslov I.

(Rus)

BUCKLING OF ORTHOTROPIC PLATES WITH TWO FREE EDGES LOADED WITH PURE IN-PLANE BENDING MOMENT

Lopatin A., Avakumov R.

(Rus)

卷 13, 编号 3 (2012)

BUSINESS ACTIVITY RISKS ASSESSMENT MODEL

Zinenko A.

(Rus)

卷 12, 编号 1 (2011)

DETERMINATION OFTHE FUNDAMENTAL FREQUENCY FOR RECTANGULARSANDWICH PLATE WITH TWO FREE EDGES

Lopatin A., Deev P., Lopatin A., Deev P.

(Rus)

卷 11, 编号 5 (2010)

ROBUST METHOD FOR CONSTRUCTION OF LINEAR REGRESSION BETWEENTWO PHYSICAL PARAMETERS IN VIEW OF THEIR RANDOM ERRORS

Shchelkanov N., Shchelkanov N.

(Rus)

卷 16, 编号 4 (2015)

Categorical definition of innovative space

Voeykova O., Lyachin V.

卷 15, 编号 4 (2014)

Application of acoustic emission testing for solder attachment electronics

Azin A., Marickiy N., Ponomarev S., Ponomarev S., Suncov S.

(Rus)

卷 15, 编号 3 (2014)

Hermite bicubic collocation method in domain with curvilinear boundary

Kireev V.

(Rus)

卷 14, 编号 4 (2013)

ABOUT PERFORMANCE IMPROVEMENT OF EVOLUTIONARY STRATEGIES TECHNIQUE APPLIED TO OPTIMAL CONTROL PROBLEM INDIRECT METHOD

Ryzhikov I.

(Rus)

卷 14, 编号 2 (2013)

FINITE ELEMENT ANALYSIS OF THE SHEAR FLEXIBLE CYLINDRIC SHELL

Nesterov V.

(Rus)

卷 19, 编号 1 (2018)

MODERN PROBLEMS OF THE PRICING FORMATION SYSTEM FOR THE FORMATION OF ESTIMATE VALUE IN THE TERRITORY OF THE RUSSIAN FEDERATION

Vlasova G., Knyazeva N., Shindina T.

(Rus)

卷 17, 编号 3 (2016)

GEOSTATIONARY ORBITAL INJECTION OF A SPACECRAFT BY THE COMBINED METHOD

Yakovlev A., Vnukov A., Balandina T., Balandin E., Tarletskiy I.

Theoretical study of Si (100) doping influence on lithium sorption and diffusion

Kuzubov A., Mikhaleva N., Popov Z., Krasnov P., Nikoleva K.

SOME GENERALIZATIONS OF METHOD OF MOMENTS IN PROBABILITY DENSITY ESTIMATION BY ORTHOGONAL SERIES

Branishti V.

卷 11, 编号 1 (2010)

Oligopoly state regulation features

Trachuk А.

(Rus)

卷 13, 编号 3 (2012)

MODELING OF SITUATIONAL STRATEGIES WITH THE USE OF NEURAL NETWORKS ON THE EXAMPLE OF AN INDUSTRIAL ENTERPRISE

Volovikov B.

(Rus)

卷 12, 编号 5 (2011)

INVESTIGATION OF STATIC AND DYNAMIC REGIMES OF MASS TRANSFER PROCESSES

Demidenko N.

(Rus)

卷 11, 编号 5 (2010)

DIRECT STATISTICAL SIMULATION METHOD IN THOMSON'S PROBLEM

Kozinkin L., Kozinkin L.

(Rus)

卷 17, 编号 1 (2016)

RESEARCH OF WEAR RESISTANCE AND LOADING ABILITY OF RUBBERS FOR SHEAVES WITH THE RUBBER COVERING

Аsheichik A., Polonsky V.

卷 15, 编号 3 (2014)

Two new eclipsing systems in Cepheus constellation

Shendel A., Veselkov S., Lapukhin Y.

(Rus)

卷 14, 编号 3 (2013)

NUMERICAL SIMULATION OF INFLUENCE OF THE STOCK ALLOWANCE ON THE RESIDUAL STRESSES IN AIRCRAFT PARTS AFTER HARDENING

Bachurin A., Bobin K., Matveev K., Kurlaev N.

(Rus)

卷 14, 编号 6 (2013)

HISTORY OF CREATION AND PROSPECTS FOR THE DEVELOPMENT OF SPACE NAVIGATION IN RUSSIA

Testoedov N., Kosenko V., Storozhev S., Zvonar V., Ermolenko V., Chebotarev V.

(Rus)

卷 19, 编号 1 (2018)

DETERMINATION OF TOTAL IONIZATION DOSE BY RAY TRACE ANALYSIS BASED ON A GEODESIC SPHERE

Sherstennikova G., Shaura A.

(Rus)

卷 17, 编号 4 (2016)

SINGLE-FREQUENCY METHOD OF investigation FOR DETERMINATION OF VERTICAL IONOSPHERIC SIGNAL DELAY

Kurnosov A., Fateev Y.

INFLUENCE OF DISTRIBUTION OF CONTACT PRESSURE ON LEAKAGE THROUGH CASKET

Аsheichik A., Polonsky V.