检索

标题
作者
The method of development of the electronic control system for curvilinear motion of a high-speed tracked vehicle with dual-flow transmission
Buzunov N., Ivanenkov V., Pirozhkov R., Kositsyn B., Kotiev G.
Evaluation of the influence of fuel pressure pulsation in the Common Rail system on the economic and environmental performance of a diesel engine
Kulmanakov S., Tyutikov S.
Feeding system for cattle based on a wheeled robotic feeder
Mikhailichenko S.
Conceptual directions for the development of driverless agricultural mobile power units
Starostin I., Eshchin A., Godzhaev T., Davydova S.
The Method of Determination of Properties of Air Springs with Two Pressure Stages and Counterpressure
Nakaznoy O., Tsipilev A.
Simulation model of a vehicle in the Simulink environment for determining fuel consumption in driving cycles
Khimchenko A., Mishchenko N., Bykov V.
Development and verification of a virtual prototype of a vehicle
Zhileykin M., Antonyan A., Furletov Y.
Aerosol technology for edge treatment of a field for the destruction of weeds and pests
Kireev I., Danilov M., Koval Z., Zimin P.
The influence of the parameters of the running systems of wheeled vehicles on the change in soil density
Shilo I., Romanyuk N., Kruk I., Orda A., Galimov R., Maksimovich K., Voynash S., Luchinovich A.
Mathematical model of the movement of a tracked train for off-road container transportation
Yevseyev K.
Mathematical modeling of the movement of a tracked vehicle using the RecurDyn application package
Poddubnyy V.
Enhancement of the lubrication system of an internal combustion engine
Aliev S., Aliev A., Aidemirov O.
The procedure for improving the management of the maintenance and repair process using the neural network technology
Shimokhin A., Kirasirov O.
Diagnostics of hydraulic cylinders of road building machines using hydraulic support
Miller A., Pugin K.
Formation of the dynamic system of the test bench for transmissions at the design stage
Godzhayev Z., Shekhovtsov V., Lyashenko M., Merlyak V., Filippov N.
Control laws for individual traction electric drive of a front loader
Gartfelder V., Stadukhin A., Mokretsov N.
Method for predicting the technical appearance of grain and forage harvesters of new generations with a substantiation of the structure of their vibration protection system
Sirotin P.
Assessment of influence of the Common Rail system high-pressure fuel pump design on regularity of fuel supply to a fuel accumulator
Kulmanakov S., Tyutikov S.
Method for analyzing parameters of single-level pneumatic elastic elements with backpressure
Nakaznoy O., Tsipilev A.
System studies of the preparation of protein feed
Priporov I.
Agricultural machine-building industry: urgent tasks
Lipkovich E.
Analysis of influence of machine-tractor unit completing quality on its movement dynamics
Roslavtsev A., Sapozhnikov I.
Development issues of innovative system of machines and technologies for plant cultivation
Yelizarov V., Beylis V.
A new conception of control system for fuel feed
Pogulyayev Y., Naumov V., Belonogov S.
BRAKE OF THE FRONT DRIVE WHEELS OF THE TRACTOR "BELARUS"
Mel'nikov A., Bilyk O., Choy K., Mel'nikov A.
To the substantiation of operation mode of backup heating and ventilation systems of drum solar dryer
Kupreyenko A., Chenin A.
Control of the separation process of potato combine
Slavkin V., Belov S., Zhuravliov A., Lobachevskiy P., Pronin V.
Method for selection of rational parameters of suspension system of high-speed tracked vehicle
Savochkin V., Sharipov V., Smirnov I., Shishanov S., Tarasova L.
PHYSICAL MODELING OF GAS-DIESEL ENGINE OPERATIONAL PROCESS
Shatrov M., Khachiyan A., Sinyavskiy V., Shishlov I., Vakulenko A.
System analysis of process of high-temperature thermomechanical treatment for blanks of hollow track pins
Dementyev V., Zasypkin A.
Development of information technologies in the field of agricultural machinery testing
Buklagin D.
Choosing the suspension for agricultural category 5(6) tractor with triangular tracked bypass
Kosenko V.
Methods of optimal aggregation of basic machines and working equipment
Yanson R., Agapov A., Nazimov M.
Feeding device of machine for liquid organic fertilizers application
Podshivalenko I., Gaydukov V., Troyanov V.
Automation of tuning system of technological process for a grain combine harvester
Tsarev Y., Dzhigarkhanov D.
Analysis of the effectiveness and the possibility of creating an auxiliary braking system for an electronically controlled vehicle of the utility patent No. 153 247
Shihan A., Serebryakov V.
Analysis and development of the heat exchanger for the exhaust gas recirculation system of the transport diesel engine
Zaripov R., Nikishin V., Kulikov A.
Changes in the standard of unified system of tolerances and fits
Bondareva G., Leonov O., Shkaruba N., Vergazova Y.
Improvement of the process of agricultural machinery fueling with gaseous fuel
Markov V., Bebenin E., Zykov S.
Mathematical model of force lubrication systems of agricultural machinery and equipment
Malomyzhev O., Fedotova N., Medvedeva I., Prokop'ev I.
Research of stability of tractor with frontand rear-mounted tools against sidewise skidding
Tukhtakuziyev A., Mansurov M.
Integrated approach to the diagnostics of tractor diesel turbocharger systems
Inshakov A., Kuvshinov A., Kornaukhov O.
Irregularity of fertilizers application in conditions of coordinate farming system
Sedashkin A., Daskin I., Kostrigin A.
Device for moisture removal from manure mass
Makhmutov M., Zabirov F., Khismatullina Y., Makhmutov M.
Method for selection of parameters of machine and tractor unit taking into account a possible stability loss of wheeled tractor with high tractional load
Schetinin Y., Klimova Y., Tarasova L.
Device for mechanochemical treatment of hydrocarbon fuel and decrease in fuel consumption
Vorobyev Y., Lomovskikh A., Basarev M., Dunayev A.
Changing of nitrogen oxides formation in the cylinder of diesel engine operating on methanol
Likhanov V., Anfilatov A.
Ejection system of distributed supply of gaseous fuel into diesel engine
Volodin V., Zagorodskikh B., Bebenin Y.
Dependence of movements of the control system regulating body on the index of oscillation
Lipa O.
A method of synthesis of multilevel cushioning systems of high-speed caterpillar machines
Kotiyev G., Sarach Y.
Improved device for increasing cross-country ability of wheeled tractors
Burdykin V.
Features of the operation of engine oils in a combined lubrication system “engine-gearbox”
Krokhta G., Krum V., Usatykh N., Khomchenko Y.
Frictional steering devices in two-flow transmissions of transport caterpillar vehicles
Demidov N., Dobretsov R., Medvedev M.
Simulation of the process of shipping and stowing cabbage in containers with gentle machine-harvesting regime of cabbage
Alatyrev S., Kruchinkina I., Alatyrev A., Yurkin A.
COMPARATIVE ANALYSIS OF THE ENERGY CAPACITY OF THE EXCITATION SYSTEM OF THE TRACTOR GENERATORS
CHERNOV A., AKIMO A.
Analysis of design quality of tillage machines for agricultural engineering small-scale mechanization means of 0.2 tractive class
Devyanin S., Sapozhnikov I., Shmonin V.
Experimental researches of a self-propelled potato harvester equipped with separation process control system
Slavkin V., Belov M., Krasnyaschikh K., Pronin V., Zhuravlev A.
Coordinate calculation method of steering linkage
Malinovskiy M., Gladov G.
Estimation of arrangement of a system containing two observation mirrors for object control
Garanin G., Zotov I.
Harmonization of Russian and European diplomas of higher professional agroengineering education
Nuyanzin Y., Naumkin N.
Modeling of reciprocating engine cycle in the process of exhaust gases recirculation
Gavrilov A., Gots A.
Modeling of work process of grain crusher ejector
Bulatov S.
Formation of nitrogen oxides in diesel engine operating on methanol and rapeseed methyl ester
Likhanov V., Devetyarov R., Kopchikov V., Fominykh A., Araslanov M., Kozlov A.
Is the agro-industrial sector of Russian Federation stagnating or developing?
Zhalnin E.
Analysing the state of design and experimental researches of transport vehicles' frame constructions
Faradzhev F., Godzhayev Z., Nadezhdin V.
Adaptive technical equipping of rural commodity producers
Lipkovich E.
Development of the design of an internal combustion engine cooling system with a pre-starting heating function
Ivanov N., Otmakhov D., Zakharychev S., Kazannikov O.
Road tests of an electromechanical wheel tractor motion control systemctor
Poddubny V., Nenaydenko A., Baybasarov R.
Investigations of the physical properties of camelina oil mixtures for hydraulic systems of agricultural machinery
Zartdinov F., Zartdinova F., Khokhlov A., Glushchenko A., Salakhutdinov I.
General technical and technological requirements to the system of innovative machine technologies and machinery
Beylis V.
Three-dimensional supporting systems of frame construction for technological superstructures of agricultural purposes
Shkel' A., Zagarin D., Kozlovskaya M., Dzotsenidze T.
Lowering of aerodynamical noise of exhaust valve of ventilation system at transport
Kuzovov A., Ovtsynov P., Merkulov V.
A system of wheeled tractor movement control based on the satellite navigation
Poddubny V.
Systems of automatic enrichment of diesel air charge with promoting substances: theory and engineering solutions
Ryblov M., Ukhanov A., Ukhanov D.
Theoretical background for the optimization of combined fuel purification in fuel systems of mobile machines
Udler E., Isayenko V., Isayenko P., Gotovtseva T.
Diesel engine conversion to fuel supply with compressed natural gas
Bazarov B., Kalauov S., Vasidov A.
Modernization of СЗ-3,6А seeder for operation by energy-saving technologies
Gorobey V., Luzin V.
Influence of using of methanol and rapeseed methyl ester on combustion process and effective indicators of 2Ч 10,5/12,0 diesel engine
Likhanov V., Devetyarov R., Fominykh A., Kopchikov V., Araslanov M., Kozlov A.
Reduction of nitric oxides' content in the exhaust gases of diesel engine by means of methanol application with usage of double fuel supply system
Likhanov V., Lopatin O., Anfilatov A.
An innovation in the construction of water vaporizing air coolers for tractor cabs
Mikhaylov V., Sharipova N.
Control of mechanical stepless transmission
Blagonravov A., Revnyakov Y.
Synthesis of a system of inertial dynamic stabilization with control according to a set of parameters measured on board a self-propelled vehicle
Sirotin P.
Justification of required number of vehicles when combined cabbage cleaning
Alatyrev S., Cruchinkina I., Alatyrev A., Fedorov D.
Investigation of viscoelastic state of soil under the influence of active surface of the tillage roller
Semenikhina Y.
SPECIALIZED MEASURMENT SYSTEM FOR EXPERIMENTAL RESEARCH OF SUSPENSION SYSTEM LOADING CONDITIONS OF A HIGH MOBILITY TRACKED VEHICLES
Dubin D., Nakaznoi O., Chizhov D., Shmakov A.
Improvement of agricultural machines reliability by means of controlled tightening
Astakhov M., Nikishkina A.
Analysis of market of row-crop cultivators
Fomenko D., Nesmiyan A.
Constructional and technological characteristic of a shutter air cleaner with curvilinear diversion canal
Saitov V., Farafonov V., Suvorov A.
Designing conception of innovative development and modernization of integrated mechanization of agro-industrial complex for the period up to 2025
Beylis V., Antyshev N.
Engineering of vibration protection system for transport unit of a motor cultivator
Podrubalov V., Podrubalov M., Skuratnik S.
High-pressure mixed-flow fan of tractor diesel cooling system
Andreyenkov A.
Dual-fuel system for tractor diesel with multi-stage heating
Ryzhov Y., Inshakov A., Kurochkin A.
Electronic on-board control system of operational and technological parameters of cotton harvesting units
Ulzhayev E., Ubaydullayev U., Ulzhayev Z.
Aerodynamic configurations, characteristics and application of transverse fans
Sychugov N.
Features of using diesel power stations and systems with energy storage and current limiters
Genin V., Popova M.
A system of capacity stabilization for the forage harvesters
Chepurnoy A., Pakhunova R., Pronin V.
Adaptive technical equipping of rural commodity producers
Lipkovich E.
Control of internal combustion engine regimes with the use of mathematical model
Makushin A., Zubkov E., Bakhvalova V., Ilyukhin A.
Tasks and problems of the revival of domestic agricultural engineering
Kolchin N., Zvolinsky V.
Comparative evaluation of the effectiveness of the vibration protection of the active suspension system with PID control
Kuz'min V., Godzhaev Z.
1 - 100 的 160 信息 1 2 > >> 

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回(例如,隐含AND)
  • 使用OR结合多个检索词,便于查找含有这些检索词的文章,例如education OR research
  • 使用括号来创建更复杂的查询; 例如:archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如: "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如:online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语

##common.cookie##