| Issue |
Title |
File |
| Vol 2, No 1 (2008) |
3D Model of Transfer of Pollutions from Motor Vehicles to the Air |
(Rus)
|
|
Sukhinov A.I., Gadelshina B.K., Lyubomischenko D.S.
|
| Vol 8, No 1-2 (2014) |
75 anniversary of department “Technology of constructional materials” of Moscow State University of Mechanical Engineering (MAMI) |
(Rus)
|
|
Kuznetsov V.A., Shlykova A.V.
|
| Vol 11, No 4 (2017) |
A crane-manipulator transfer position impact on a chassis loadings of a base vehicle |
(Rus)
|
|
Lagerev A.V., Lagerev I.A.
|
| Vol 7, No 1-5 (2013) |
A disciplined approach to innovation |
(Rus)
|
|
Sharyan E.G., Tkacheva O.A.
|
| Vol 9, No 4-4 (2015) |
A mathematical model of treelike actuator of a walking robot considering imposed links |
(Rus)
|
|
Kovalchuk A.K., Yarots V.V.
|
| Vol 4, No 2 (2010) |
A numerical analysis of excited-by-friction relaxation self-excited oscillations of an electric steering drive at variable input signal speed |
(Rus)
|
|
Mikhailova V.L.
|
| Vol 5, No 2 (2011) |
A Numerical Solution of the Stress Concentration Problem for the Case of a Three-layered Elastic Plane with the Two Identical Vertically Placed Circular Holes under Longitudinal Tension |
(Rus)
|
|
Mikhaylova V.L., Sukhomlinov L.G., Mazin V.A.
|
| Vol 7, No 3-1 (2013) |
A variant of link between stress and deformation in the theory of depressed shells |
(Rus)
|
|
Volodin V.P., Nadirov E.R.
|
| Vol 15, No 3 (2021) |
A virtual test bench for determining the loads in the air suspension of the rear trolley of a truck at the early stages of design |
(Rus)
|
|
Maksimov R.O., Chichekin I.V.
|
| Vol 4, No 2 (2010) |
About a role normative and technical documentation in formation of competence of automobile engineers |
(Rus)
|
|
Andrukh O.N.
|
| Vol 7, No 1-6 (2013) |
Absenteeists as a political stratum of modern Russian society |
(Rus)
|
|
Abramov A.V., Rybina M.V., Davydova N.P.
|
| Vol 11, No 4 (2017) |
Absorption of gasoline vapors in automobile adsorber with a carbon filter |
(Rus)
|
|
Khodyakov V.A., Rachkova V.A., Bernatskiy V.V., Khlopkov S.V., Abu-Nidzhim R.K.
|
| Vol 9, No 3-1 (2015) |
Accounting of power loss in differential mechanism while design of multithreaded hybrid powerplants |
(Rus)
|
|
Ryabev A.V.
|
| Vol 3, No 1 (2009) |
Accuracy Enhancement for Vehicle Motion Mathematical Model on the Basis of Test Results |
|
|
Kurmaev R.K., Lepeshkin A.V.
|
| Vol 7, No 2-1 (2013) |
Acoustic designing of air exchange system units on the transport |
(Rus)
|
|
Merkulov V.I., Nikulin A.V.
|
| Vol 7, No 3-1 (2013) |
Action as an algebraic vector magnitude |
(Rus)
|
|
Ketsaris A.A.
|
| Vol 7, No 1-6 (2013) |
Activity approach to the study of organization and management |
(Rus)
|
|
Shabaykin A.Y.
|
| Vol 8, No 1-5 (2014) |
Actual loanwords in the modern engineering vocabulary |
(Rus)
|
|
Isaeva N.V., Zmazneva O.A.
|
| Vol 8, No 4-5 (2014) |
Actual methods of interactive learning of Russian language |
(Rus)
|
|
Kovina T.P., Kulchytskaya A.I.
|
| Vol 8, No 4-3 (2014) |
Actual tasks intelligent lighting control |
(Rus)
|
|
Avanyan T.G., Zubov D.V., Paramonov E.A.
|
| Vol 2, No 2 (2008) |
Actual Tests of Molecular Energy Storage with the Use of Continuous Data Logging Unit |
(Rus)
|
|
Antipenko V.S., Lebedev S.A., Abanin V.A.
|
| Vol 5, No 2 (2011) |
Adaptation of the Teaching Methods of Material Science Course to Modern Conditions |
(Rus)
|
|
Volkov G.M., Manevsky S.E.
|
| Vol 5, No 1 (2011) |
Adaptive and methodical principles of swimming course at the initial stage |
(Rus)
|
|
Turkin Y.K.
|
| Vol 8, No 1-2 (2014) |
Adaptive optimization of bevel gear repair assembly of automobile transmissions |
(Rus)
|
|
Vinogradov V.M., Cherepakhin A.A.
|
| Vol 3, No 2 (2009) |
Adaptive Trailer Control System |
|
|
Abramov A.M.
|
| Vol 8, No 3-4 (2014) |
Adjusted method of solving the contact problem for an annular layer taking into account the friction forces. Statement 2. A solution of functional equations defining the mathematical model of the contact problem |
(Rus)
|
|
Bozhkova L.B., Noritsina G.I., Ryabev V.G.
|
| Vol 2, No 2 (2008) |
Advance Estimation of Quality and Competitiveness of Products in Flexible Automatic Assembly |
(Rus)
|
|
Shabaykovich V.A.
|
| Vol 7, No 2-2 (2013) |
Advancing the short workpieces without the formation of a defect clip |
(Rus)
|
|
Aliev I.S., Kal'chenko P.P., Shvec A.A., Zhbankov J.G., Tagan L.V.
|
| Vol 7, No 1-2 (2013) |
Advantages of using of a device for combined machining and surface plastic deformation with specified rolling force when machining of nonrigid parts such as a hollow cylinder |
(Rus)
|
|
Vetrova E.A., Lebedev P.A., Adeyev A.S.
|
| Vol 7, No 4-1 (2013) |
Advantages of various forms of corporate integration from a perspective of position stability (on the example of the modern automotive industry) |
(Rus)
|
|
Apalkova T.G., Klimovich A.D.
|
| Vol 7, No 1-1 (2013) |
Aerodynamic drag of radiator in unsteady air flow |
(Rus)
|
|
Petrov A.P.
|
| Vol 4, No 1 (2010) |
Aerodynamics as a Method of Improvement of Stability and Balancing of Weight Distribution for a Formula SAE Car |
(Rus)
|
|
Karpukhin K.E., Bakero P.I.
|
| Vol 7, No 4-2 (2013) |
Aesthetics as a philosophical discipline |
(Rus)
|
|
Nikitina I.P.
|
| Vol 12, No 3 (2018) |
Age of aerodynamics of automobiles |
(Rus)
|
|
Korolev E.V., ZHamalov R.R., Bernackij V.V.
|
| Vol 13, No 1 (2019) |
Agricultural tractors on Russian market (based on the International exhibition “Agrosalon 2018”) |
(Rus)
|
|
Parfenov A.P.
|
| Vol 7, No 4-2 (2013) |
Agritourism: current state and prospects of development |
(Rus)
|
|
Panyukov A.I., Panyukova A.I.
|
| Vol 7, No 4-2 (2013) |
Alexander P. Pankin (experience of biographical reconstruction) |
(Rus)
|
|
Griko T.I.
|
| Vol 8, No 4-4 (2014) |
Algebra of electric and weak charges |
(Rus)
|
|
Kalpina N.Y., Ketsaris A.A.
|
| Vol 8, No 2-3 (2014) |
Algorithm for determination of illumination intensity of solar panels of the Russian segment of the International Space Station |
(Rus)
|
|
Sazonov V.V.
|
| Vol 17, No 3 (2023) |
Algorithm for forming traction and braking torque settings at the shaft of a traction motor by means of a single pedal |
|
|
Klimov A.V.
|
| Vol 11, No 2 (2017) |
Algorithm for navigation of ground-based transport-technological facilities on the basis of integrated inertial-satellite navigation and odometer data |
(Rus)
|
|
Novikov P.V., Sheypak A.A., Gerdi V.N., Novikov V.V., Enin V.N.
|
| Vol 15, No 2 (2021) |
Algorithm of anti-lock braking system for two-axle vehicles with one driving axle with adaptive redistribution of braking forces |
(Rus)
(Eng)
|
|
Zhileykin M.M., Chugunov D.S.
|
| Vol 8, No 2-2 (2014) |
Algorithm of minimization of tool idle movements during milling of complex surfaces on 3-axis CNC machines |
(Rus)
|
|
Ponomarev B.B., Nguen V.N.
|
| Vol 7, No 3-1 (2013) |
Algorithmic concepts of method of solid bodies |
(Rus)
|
|
Rusanov P.G.
|
| Vol 4, No 1 (2010) |
Algorithmization Principles of Machining Datum Surface Select |
(Rus)
|
|
Maximov A.D., Sorokin Y.A.
|
| Vol 9, No 1-2 (2015) |
Alignment of structure by thickness of steel strips at hot rolling |
(Rus)
|
|
Aldunin A.V.
|
| Vol 9, No 4-1 (2015) |
Alternative method of geometric parameters measuring of throttle channels of circular cylindrical shape |
(Rus)
|
|
Kuznetsov V.S., Yarots V.V.
|
| Vol 2, No 1 (2008) |
An Algorithm for Calculating of Complex Systems on the Bulk Hydraulic Transient Mode |
(Rus)
|
|
Suzdaltsev V.E., Fateev I.V.
|
| Vol 8, No 1-1 (2014) |
An alternative source of electric energy on automobile: the use of exhaust gas energy |
(Rus)
|
|
Ovsiannikov E.M., Klyukin P.N., Ketsaris A.A., Akimov A.V.
|
| Vol 16, No 2 (2022) |
An energy efficiency analysis of the electrodynamic antispin regulation of the city electrobus |
|
|
Zhileykin M.M., Klimov A.V., Maslennikov I.K.
|
| Vol 3, No 2 (2009) |
An incremental geometrically nonlinear finite element membrane model of sheet metal forming processes under action of rigid tools |
(Rus)
|
|
Sukhomlinov L.G., Petrov V.K.
|
| Vol 9, No 4-5 (2015) |
An innovative approach to automated recording of the bottom relief on video in the real time with usage of multibeam sonar Hydrosweep DS |
(Rus)
|
|
Lemenkova P.A.
|
| Vol 5, No 1 (2011) |
An integrated approach to building of sustainable development management under transition to a postindustrial society |
(Rus)
|
|
Platko A.Y., Dvortsova O.V., Nayanov E.A.
|
| Vol 9, No 4-1 (2015) |
An integrated navigation system of ground transport vehicle |
(Rus)
|
|
Novikov P.V., Novikov V.V., Sheypak A.A.
|
| Vol 9, No 4-5 (2015) |
Analysis and assessment of small and medium entrepreneurship, as a factor in increasing the competitiveness of the municipality (for example, the area of the municipality Kirzhachskiy) |
(Rus)
|
|
Krutova O.S., Popova L.N.
|
| Vol 6, No 2-2 (2012) |
Analysis and synthesis of robust control for linear systems of double damping |
(Rus)
|
|
Trindyuk V.A., Kiyko G.I.
|
| Vol 7, No 4-1 (2013) |
Analysis of alternative ways to overcome the economic problems of small airlines in Russia |
(Rus)
|
|
Skrylev A.O.
|
| Vol 2, No 2 (2008) |
Analysis of Anaerobic Product Properties in Fluid and Aggressive Environments |
(Rus)
|
|
Goncharov A.B., Tulinov A.B.
|
| Vol 7, No 2-2 (2013) |
Analysis of calculation methods of springback of sheet materials |
(Rus)
|
|
Saprykin B.J.
|
| Vol 17, No 3 (2023) |
Analysis of collisions of precipitating solid particles with a wall in a viscous liquid |
|
|
Kondratiev A.S., Shvydko P.P.
|
| Vol 6, No 2-1 (2012) |
Analysis of constructions providing the maximum thermodynamic effectiveness of reciprocating engines |
(Rus)
|
|
Khripach N.A., Lezhnev L.U., Papkin B.A., Shustrov F.A., Tatarnikov A.P., Tingaev N.V.
|
| Vol 10, No 1 (2016) |
Analysis of design schemes of combination of vehicles towing elements wheel drives |
(Rus)
|
|
Gorelov V.A., Chudakov O.I.
|
| Vol 6, No 1 (2012) |
ANALYSIS OF EFFECTIVENESS OF INVESTMENTS IN MODERNIZATION OF PRODUCTION FACILITIES OF AN ENGINEERING COMPANY |
(Rus)
|
|
Kokurin D.I., Pavelyev V.P., Koltunov A.I.
|
| Vol 7, No 4-1 (2013) |
Analysis of enhancing the effectiveness of insurance companies at mergers and acquisitions |
(Rus)
|
|
Loiko A.P.
|
| Vol 7, No 4-1 (2013) |
Analysis of factorial models ratings bankruptcy machinery enterprises |
(Rus)
|
|
Katanaev N.T., Arkatova N.A., Nazarkova E.A.
|
| Vol 5, No 2 (2011) |
Analysis of Formation of Machining Error in the Technological System of Combined Machining and Surface Plastic Deformation of Non-rigid Parts of the Hollow Cylinder Type |
(Rus)
|
|
Vetrova E.A.
|
| Vol 6, No 2-1 (2012) |
Analysis of forming of contact area by rear wheel-drive 4x2 wheel chassis with elastic circuit of power flow input |
(Rus)
|
|
Sergeyev A.I.
|
| Vol 9, No 3-4 (2015) |
Analysis of Geared Turbofan Engine Transmission on Operational and Breakdown Overloads |
(Rus)
|
|
Temis M.J., Egorov A.M.
|
| Vol 5, No 1 (2011) |
Analysis of hard-shaped cutter assemblies wear depending on the diameter and intensity of heat rejection |
(Rus)
|
|
Chulin I.V., Grechishnikov V.A.
|
| Vol 8, No 3-1 (2014) |
Analysis of icing of flow channel in vehicle turbochargers |
(Rus)
|
|
Martyanov O.A., Merkulov V.I.
|
| Vol 7, No 4-1 (2013) |
Analysis of innovative activity of the Russian organizations |
(Rus)
|
|
Drynochkin A.V., Sekerin S.V.
|
| Vol 6, No 1 (2012) |
ANALYSIS OF INNOVATIVE MODELS OF MANAGEMENT AND ORGANIZATION DEVELOPMENT |
(Rus)
|
|
Filyakin Y.P., Moguev B.D.
|
| Vol 7, No 1-1 (2013) |
Analysis of kinematic and power parameters of rolling wheel propulsor |
(Rus)
|
|
Sergeev A.I., Esakov A.E., Kruglov S.M., Cherniy I.V.
|
| Vol 6, No 2-2 (2012) |
Analysis of machinability of steel 75HGFC |
(Rus)
|
|
Volkov R.B., Golobkov A.V., Kuznetsov V.A., Cherepahin A.A.
|
| Vol 7, No 4-1 (2013) |
Analysis of major cost components in automotive industry and ways to their optimization |
(Rus)
|
|
Sekerin V.D., Strakovskaya M.V.
|
| Vol 6, No 2-2 (2012) |
Analysis of measuring errors and an object in determining residual stresses |
(Rus)
|
|
Yakovlev M.G.
|
| Vol 2, No 1 (2008) |
Analysis of Mechanics of the Process of Cutting Hardened Material. Chip formation |
(Rus)
|
|
Olenin L.D.
|
| Vol 10, No 4 (2016) |
Analysis of methods and means of ecological control of harmful emissions of exhaust gases of automobiles |
(Rus)
|
|
Solomin V.A., Shabanov A.V., Shabanov A.A., Kilyushnik V.M., Mladenskiy A.V.
|
| Vol 7, No 1-2 (2013) |
Analysis of microstructure of surface layer of a hole while deforming drawing in lubricants |
(Rus)
|
|
Buylov A.E.
|
| Vol 6, No 2-2 (2012) |
Analysis of multilayer material producing and prospects of using of nonequal-thick sheet material |
(Rus)
|
|
Kolesov A.V.
|
| Vol 6, No 1 (2012) |
ANALYSIS OF MUTUAL COMPATIBILITY OF GEOMETRICAL AND PHYSICAL-MECHANICAL CHARACTERISTICS OF THE SURFACE LAYER OF TITANIUM ALLOY PRODUCTS AFTER ULTRASONIC MACHINING |
(Rus)
|
|
Taratynov O.V., Kharchenko V.V., Korneev D.V.
|
| Vol 9, No 2-1 (2015) |
Analysis of power flows distribution in the transmission of an articulated truck with an activated trailing unit |
(Rus)
|
|
Lepeshkin A.V., Mikhaylin A.A., Katanaev N.T.
|
| Vol 9, No 3-1 (2015) |
Analysis of problem of soil compaction and search for ways to its solving |
(Rus)
|
|
Lavlinskiy A.M.
|
| Vol 17, No 3 (2023) |
Analysis of prospects for improvement and development of vehicle suspension structures |
|
|
Martynov E.N., Potashov I.S., Bokarev A.I.
|
| Vol 9, No 4-5 (2015) |
Analysis of raw material dependence of the Russian economy and its impact on the competitiveness of the country |
(Rus)
|
|
Shiriaev D.V., Vasilieva O.A.
|
| Vol 2, No 1 (2008) |
Analysis of Related Parties |
(Rus)
|
|
Rozhnova O.V., Igumnov V.M.
|
| Vol 8, No 2-5 (2014) |
Analysis of road transport service market in Moscow |
(Rus)
|
|
Kovaleva O.B., Girka T.V.
|
| Vol 2, No 2 (2008) |
Analysis of Smoothness of Truck Vehicle Running with the Coupled System of Cushioning |
(Rus)
|
|
Golovashkin F.P.
|
| Vol 7, No 2-2 (2013) |
Analysis of stress and strain state in the elementary volume at the example of the upseting process |
(Rus)
|
|
Mamaev V.B.
|
| Vol 6, No 1 (2012) |
ANALYSIS OF TECHNOLOGICAL PARAMETERS OF BENDING OF PARTS OF PIPE BEND-TYPE |
(Rus)
|
|
Kutyshkina E.A.
|
| Vol 7, No 2-2 (2013) |
Analysis of technological process of forging broaches with the simulation in DEFORM-3D |
(Rus)
|
|
Taupek I.M., Alekseev P.L.
|
| Vol 8, No 1-1 (2014) |
Analysis of technologies of processing alternative energy sources in motor fuel |
(Rus)
|
|
Fomin V.M., Apelinskiy D.V.
|
| Vol 6, No 2-1 (2012) |
Analysis of the characteristics of external combustion heat engine by computer simulation |
(Rus)
|
|
Potapov S.I., Nikishkin S.I., Piskarev M.Y.
|
| Vol 9, No 4-5 (2015) |
Analysis of the competitive advantages of consolidating resources of the state, the business community and educational institutions for the implementation of regional programs for the development of professional education |
(Rus)
|
|
Kamenskih N.A.
|
| Vol 6, No 2-1 (2012) |
Analysis of the design of the automotive generator of reciprocating type |
(Rus)
|
|
Dukhanina V.I., Ketsaris A.A.
|
| Vol 3, No 1 (2009) |
Analysis of the Effect of Restricted Stress-strain Adhesive Joint and Its Application in Bus Industry |
|
|
Voronkov O.V., Peskov V.I.
|
| Vol 16, No 4 (2022) |
Analysis of the efficiency of balancing pistons of feed pumps |
|
|
Zharkovsky A.A., Zakharov A.A., Fedorov S.P.
|
| Vol 7, No 1-3 (2013) |
Analysis of the evolution of the natural forms of multivariable mechanical systems (circular plates and domes of revolution) |
(Rus)
|
|
Korol E.Z.
|
| Vol 14, No 2 (2020) |
Analysis of the heat balance of a spacesuit in a solar airplane |
(Rus)
|
|
Rezanov E.A., Merkulov V.I., Tishchenko V.I.
|
| Vol 2, No 1 (2008) |
Analysis of the Inertia Influence on the Average Speed of a Tracked Vehicle |
(Rus)
|
|
Strelkov A.G., Ilyichev A.S.
|
| 1 - 100 of 2498 Items |
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 > >> |
