| 期 |
标题 |
文件 |
| 卷 8, 编号 4-1 (2014) |
Study of the thermal state of urbomachine blades by means of software complex |
(Rus)
|
|
Kovalnogov V., Fedorov R., Generalov D.
|
| 卷 1, 编号 2 (2007) |
The research of thermal capacity of submicrocrystalline powder materials on the basis of nickel aluminide |
(Rus)
|
|
Levin V.
|
| 卷 7, 编号 1-4 (2013) |
The study of technological opportunities of the new sorbent microcrystalline calcium hydroxide |
(Rus)
|
|
Gonopolskiy A., Papovyan O.
|
| 卷 7, 编号 3-1 (2013) |
Study of viscous fluid flow with respect to calculating of rotary granulator |
(Rus)
|
|
Aleksandrova S., Serov M., Averyanova G.
|
| 卷 12, 编号 3 (2018) |
The toxicity study of diesel engines working on biofuels based on methyl alcohol |
(Rus)
|
|
Lihanov V., Lopatin O.
|
| 卷 9, 编号 1-2 (2015) |
Research of tubular samples on stretching (plane deformation) |
(Rus)
|
|
Filippov Y., Zaytsev A.
|
| 卷 9, 编号 3-5 (2015) |
Research of Democritus teachings on necessity, chance and possibility using means of modern logic |
(Rus)
|
|
Ivlev V.
|
| 卷 6, 编号 2-4 (2012) |
Study of physico-chemical and structural processes in obtaining of aluminosilicate glass ceramics |
(Rus)
|
|
Meshalkin V., Orlova O., Butusov O., Galaev A.
|
| 卷 7, 编号 1-3 (2013) |
Study of vibration sensitivity of a rotor of stationary gas-turbine unit on slide bearings to change of main settings of the system |
(Rus)
|
|
Temis Y., Temis M., Egorov A.
|
| 卷 15, 编号 3 (2021) |
Investigation of the environmental performance of a diesel engine when operating on multicomponent biofuel |
(Rus)
|
|
Plotnikov S., Sergeyev D., Smol'nikov M., Shipin A.
|
| 卷 15, 编号 1 (2021) |
Investigation of the environmental characteristics of a diesel engine when operating on activated fuel |
(Rus)
|
|
Plotnikov S., Kartashevich A., Motovilova M.
|
| 卷 9, 编号 3-1 (2015) |
Investigation of operating temperature of dump trucks pneumatic tires |
(Rus)
|
|
Goryunov S., Sharipov V., Kutkov G.
|
| 卷 7, 编号 1-4 (2013) |
The study of electro-optical and optical-electronic systems of motor vehicles |
(Rus)
|
|
Kardashev G., Zubov D., Karlov S.
|
| 卷 7, 编号 3-2 (2013) |
Study of multicyclone element gas treatment |
(Rus)
|
|
Nikolaykina N., Zavyalova M., Khutorov Y.
|
| 卷 8, 编号 2-3 (2014) |
Study of energy parameters of abiotic environment in near-field low-frequency electromagnetic field source zone |
(Rus)
|
|
Grafkina M., Nyunin B., Sviridova E.
|
| 卷 18, 编号 1 (2024) |
Study of efficiency of the algorithm of acceleration and deceleration control of a wheeled vehicle by means of the accelerator pedal |
|
|
Klimov A.
|
| 卷 14, 编号 2 (2020) |
Study of the effectiveness of the electromechanical system of active vibration protection of a vehile with various regulators |
(Rus)
|
|
Randin D., Tulupov P.
|
| 卷 5, 编号 2 (2011) |
Studies of Microcutting Kinematics on Designing Grinding Heads to Form the Sealing Surfaces on the Parts of Pipe Fitting |
(Rus)
|
|
Gaysin S., Tsvik L., Mukhin S., Travin D.
|
| 卷 7, 编号 4-1 (2013) |
Study of correlation relation between volume production of vehicles and equipment and the factors of production used in mechanical engineering |
(Rus)
|
|
Dvortsova O., Nayanov E.
|
| 卷 9, 编号 1-6 (2015) |
Historical analysis of formation of logical ideas in the Middle Ages |
(Rus)
|
|
Ivlev V., Ivleva M.
|
| 卷 8, 编号 1-5 (2014) |
The history of occurrence and development of commercial courts in Russia |
(Rus)
|
|
Olshanskaya L.
|
| 卷 8, 编号 3-5 (2014) |
History and theory of scientism as a philosophical phenomenon |
(Rus)
|
|
Khudoley S.
|
| 卷 1, 编号 2 (2007) |
The study of pun in Russian linguistics of XIX - XX centuries |
(Rus)
|
|
Mikheykina S.
|
| 卷 8, 编号 4-5 (2014) |
History of Commercial Court as a factor in boosting trade and industrial life of Russia in the second half of the XIX century |
(Rus)
|
|
Olshanskaya L.
|
| 卷 17, 编号 2 (2023) |
History of the scientific researches of the vehicles with hydrogen power units |
|
|
Anisimov V., Klimov A.
|
| 卷 8, 编号 2-1 (2014) |
History of concept art and design concepts in the transportation design |
(Rus)
|
|
Lepeshkin I., Kruglov S.
|
| 卷 9, 编号 2-1 (2015) |
Current source for hardening electrical equipment of vehicles |
(Rus)
|
|
Prokhorov V., Devochkin O.
|
| 卷 4, 编号 2 (2010) |
Sources of interference in the circuits of power supply stations |
(Rus)
|
|
Makarov S., Khlopotkin D.
|
| 卷 7, 编号 1-4 (2013) |
Iterative procedure for the synthesis of an optimal robust PID controller |
(Rus)
|
|
Polyanskiy V.
|
| 卷 3, 编号 2 (2009) |
On the analysis of cutting process mechanics. Cutting with a flattened edge tool |
(Rus)
|
|
Olenin L.
|
| 卷 2, 编号 1 (2008) |
Analysis of Mechanics of the Process of Cutting Hardened Material. Chip formation |
(Rus)
|
|
Olenin L.
|
| 卷 5, 编号 2 (2011) |
Analysis of the Mechanics of Cutting by a Cylindrical Drill with a Bridge |
(Rus)
|
|
Olenin L.
|
| 卷 7, 编号 1-3 (2013) |
Analysis of the evolution of the natural forms of multivariable mechanical systems (circular plates and domes of revolution) |
(Rus)
|
|
Korol E.
|
| 卷 6, 编号 2-2 (2012) |
Technology of processing of complex shape products (on the example of gas-turbine engine mono-wheel blades) |
(Rus)
|
|
Gorelov V., Arshiniv S., Maximov Y., Pini B., Bekaev A., Merzlikin V., Vtorova A.
|
| 卷 9, 编号 4-5 (2015) |
K voprosu ispol'zovaniya metodov i metodik analiza finansovogo sostoyaniya mashinostroitel'nykh predpriyatiy v usloviyakh sovremennoy konkurentsii |
(Rus)
|
|
Tsogoev V., Shiriaev D.
|
| 卷 7, 编号 1-1 (2013) |
Study of oscillations of the automobile power plant |
(Rus)
|
|
Lomakin V., Yemelyanov A.
|
| 卷 6, 编号 1 (2012) |
STUDY OF FINE STRUCTURE OF INFRASOUND AND ELECTROMAGNETIC FIELDS OF A VEHICLE |
(Rus)
|
|
Nyunin B., Grafkina M.
|
| 卷 6, 编号 2-1 (2012) |
Study of stability and controllability of hybrid car with variable-in-motion drive |
(Rus)
|
|
Baulina E., Dementyev Y., Iturralde P., Kislov A.
|
| 卷 7, 编号 2-1 (2013) |
The problem of correlation of cornering characteristics of tires in test bench tests |
(Rus)
|
|
Bernadskiy V., Krasavin P., Kruglov S., Melo O.
|
| 卷 7, 编号 1-1 (2013) |
Simulation of microprofile of road by wheel track |
(Rus)
|
|
Chabunin I.
|
| 卷 18, 编号 1 (2024) |
On the issue of contactless alternators on movable objects |
|
|
Ryabykh E., Maleev R., Akimov A.
|
| 卷 8, 编号 1-2 (2014) |
Interrelation of wear resistance with quality parameters of the surface layer of parts after machining |
(Rus)
|
|
Sutyagin A.
|
| 卷 3, 编号 2 (2009) |
On the question of influence of geometrical perfection parameters of the surface of the workpiece |
(Rus)
|
|
Bekaev A., Kouznetsov V., Schedrin A., Skoromnov V.
|
| 卷 1, 编号 2 (2007) |
Selection of the Criterion for the Automatic Clutch Control Development |
(Rus)
|
|
Karunin A., Kretov A., Esakov A.
|
| 卷 10, 编号 2 (2016) |
Integrated vehicle safety |
(Rus)
|
|
Azarov V., Gayisin S., Kutenev V.
|
| 卷 9, 编号 4-5 (2015) |
On the issue of competitiveness of Russian advertising in social networks |
(Rus)
|
|
Loiko A., Alenina E.
|
| 卷 8, 编号 3-5 (2014) |
Problem of conceptualization of information policy |
(Rus)
|
|
Kalachev D., Brovko V.
|
| 卷 9, 编号 1-6 (2015) |
The question of cultural and symbolic connotations in idiomatics |
(Rus)
|
|
Arutyunyan V.
|
| 卷 7, 编号 4-2 (2013) |
International legal regulation of legal status of minority languages (on the example of Russia, Ukraine, Estonia) |
(Rus)
|
|
Machinskaya D.
|
| 卷 8, 编号 4-5 (2014) |
Metaphorization of terms of machine-building industry |
(Rus)
|
|
Zaitseva T., Martirosyan N.
|
| 卷 8, 编号 1-5 (2014) |
Methodology of feminism study in Russia in the beginning of XX century |
(Rus)
|
|
Kradetskaya S.
|
| 卷 9, 编号 2-5 (2015) |
On the question of research and production of domestic industry development companies |
(Rus)
|
|
Tsogoev V., Barykin D., Boronnikov D.
|
| 卷 8, 编号 1-5 (2014) |
The necessity of modernization of the system of personnel management in Russian companies |
(Rus)
|
|
Tayvo M., Latypov N.
|
| 卷 9, 编号 4-5 (2015) |
On the subject of the need to use innovative materials in order to ensure the effective development of construction enterprises |
(Rus)
|
|
Gribova E., Sokolova S.
|
| 卷 8, 编号 4-5 (2014) |
New changes in tax legislation of the Russian Federation |
(Rus)
|
|
Krasilnikova I.
|
| 卷 8, 编号 1-2 (2014) |
Increase of metal utilization factor through the use of combined operations of drawing-flanging in manufacture of box-shaped parts with a hole in a bottom part |
(Rus)
|
|
Nikitenko V.
|
| 卷 8, 编号 2-5 (2014) |
Legal content of the "secular state" concept |
(Rus)
|
|
Bulavina M.
|
| 卷 2, 编号 2 (2008) |
On the issue of Practical View of the Formula Dscribing the Magnetization Curve of Quasi-solid Magnet |
(Rus)
|
|
Sandulyak A.
|
| 卷 8, 编号 3-1 (2014) |
Application of methods to predict the durability of friction pads for automobile clutch |
(Rus)
|
|
Esakov A.
|
| 卷 9, 编号 3-5 (2015) |
Priority directions of improving order and forms of control on citizens and organizations inquiries at agencies and municipalities |
(Rus)
|
|
Samsonova N., Boronnikov D., Tsogoev V.
|
| 卷 10, 编号 3 (2016) |
Design of four shaft misaligned semi-automatic transmissions for agriculture tractors |
(Rus)
|
|
Sharipov V., Platonov V., Kryuchkov V., Alendeev E.
|
| 卷 8, 编号 2-1 (2014) |
Strength of polymer composites used in automotive industry |
(Rus)
|
|
Osipov N., Pirozhkov V., Chabunin I.
|
| 卷 8, 编号 2-5 (2014) |
Development of financial market infrastructure |
(Rus)
|
|
Tereshkina O.
|
| 卷 7, 编号 1-6 (2013) |
The question of development of creative skills on Russian language classes for foreign students studying on the 1st year of technical university |
(Rus)
|
|
Gontareva O.
|
| 卷 7, 编号 2-2 (2013) |
The calculation of volumetric accuracy |
(Rus)
|
|
Maksimov J., Krylov O., Kuz'minskij D.
|
| 卷 7, 编号 3-2 (2013) |
Rational choice of surface shape for freezing of water ice |
(Rus)
|
|
Marinyuk B., Ugolnikova M.
|
| 卷 9, 编号 4-5 (2015) |
To a question about the content of innovative activities of industrial enterprises |
(Rus)
|
|
Tsogoev V., Alenin I.
|
| 卷 8, 编号 3-5 (2014) |
Scientific and methodological support and information support of interaction of the Russian Ministry of Education and Science with the educational authorities of the Russian Federation |
(Rus)
|
|
Tsogoev V., Barykin D., Boronnikov D.
|
| 卷 9, 编号 4-5 (2015) |
On the structure of the education authorities of subjects of the Russian Federation |
(Rus)
|
|
Arkatov P., Borovin U.
|
| 卷 9, 编号 2-5 (2015) |
On the essence and principles of innovation infrastructure engineering companies |
(Rus)
|
|
Alenina E., Tsogoev V.
|
| 卷 8, 编号 1-5 (2014) |
Typology of the social organization of small business in the southern republics of Russia |
(Rus)
|
|
Tsogoev V., Dzakoev Z.
|
| 卷 9, 编号 4-5 (2015) |
On the formation of readiness of students to innovative activity in the study of foreign languages |
(Rus)
|
|
Volodina E., Volodina I.
|
| 卷 7, 编号 4-2 (2013) |
Formation of pragmatic-communicative competence on learning of foreign language for specific purposes |
(Rus)
|
|
Zakirova E., Tsilenko L.
|
| 卷 7, 编号 4-1 (2013) |
The functions of the technological platform as a head of the center for strategic scientific and technological development of mechanical engineering organizations |
(Rus)
|
|
Trishkin A.
|
| 卷 7, 编号 4-1 (2013) |
Human capital |
(Rus)
|
|
Pivovarov V., Mazur V.
|
| 卷 7, 编号 1-1 (2013) |
Engineering method of calculation of gasdynamic foil bearings of turbocompressors |
(Rus)
|
|
Merkulov V., Plykin M., Tischenko I.
|
| 卷 6, 编号 2-1 (2012) |
Engineering method of calculation of gasdynamic foil bearings of turbocompressors |
(Rus)
|
|
Merkulov V., Plykin M., Tishchenko I.
|
| 卷 7, 编号 1-6 (2013) |
Sources of formation and some of the structural-semantic peculiarities of forming the terms of the automotive industry in the Russian language |
(Rus)
|
|
Anokhina T., Zaytseva T., Martirosyan N.
|
| 卷 6, 编号 1 (2012) |
ASSURANCE OF THE QUALITY OF PROCESSING OF COMPLEX CONTOURED PARTS ON MACHINES WITH VARIABLE ELEMENTS |
(Rus)
|
|
Maximov Y., Abramova A., Kuzminsky D., Mokrinskaya A.
|
| 卷 6, 编号 2-2 (2012) |
Precision of machining on CNC machines |
(Rus)
|
|
Maksimov Y., Bekayev A., Nadolskiy M., Prokhorov A.
|
| 卷 17, 编号 2 (2023) |
To the question of the description of the internal combustion engine in the mathematical model of the lifting system of the hovercraft (on the example of the ZMZ-51432.10 CRS engine) |
|
|
Lepeshkin A., Nguyen V.
|
| 卷 7, 编号 2-2 (2013) |
Determination of the stress-strain state of plastically deformed object with regard to the processes semi-hot die forging |
(Rus)
|
|
Pyzhov V.
|
| 卷 8, 编号 3-1 (2014) |
Optimization of suspension system of high-speed tracked vehicles |
(Rus)
|
|
Savochkin V., Sharipov V., Smirnova I., Shishanov S.
|
| 卷 1, 编号 2 (2007) |
On the issue of optimization of processing environment for high-speed technological systems |
(Rus)
|
|
Mikhailov V., Shershakov N.
|
| 卷 4, 编号 1 (2010) |
On the Issue of Particularities of Design and Simulation of Welded Constructions of Machine's Basic Parts |
(Rus)
|
|
Mihaylov V., Porhynov S.
|
| 卷 8, 编号 1-1 (2014) |
Improving the dynamic characteristics of the hydraulic drive when braking |
(Rus)
|
|
Gurevich Y., Ivochkin M.
|
| 卷 5, 编号 1 (2011) |
On the issue of management of information, material and related flows of industrial enterprise |
(Rus)
|
|
Ionov V., Makarenko S.
|
| 卷 7, 编号 4-2 (2013) |
Concept of “philological knowledge of native language of students” in teaching Russian as a foreign language (on the example of Chinese and Arabic) |
(Rus)
|
|
Anokhin T., Platonov E.
|
| 卷 7, 编号 2-1 (2013) |
Determination of axial forces on pulleys of V belt transmission |
(Rus)
|
|
Ivanov V., Mamaev A., Chepurnoy S.
|
| 卷 7, 编号 1-1 (2013) |
Assessment of impact of reactive units to oscillations of an automobile power plant |
(Rus)
|
|
Lomakin V., Yemelyanov A.
|
| 卷 9, 编号 4-5 (2015) |
To the question of the competitiveness of companies |
(Rus)
|
|
Panin M., Borodacheva L.
|
| 卷 7, 编号 4-1 (2013) |
Assessing sustainable development in the conditions of transnationalization |
(Rus)
|
|
Govorina E., Blyznyuk O.
|
| 卷 9, 编号 4-5 (2015) |
On the question of increasing the international competitiveness of Russian universities |
(Rus)
|
|
Shiriaev D.
|
| 卷 17, 编号 3 (2023) |
On the improvement efficiency and safety of operation of underground tunnel escalators. Adaptation of processes of planning and control |
|
|
Popov V., Elantsev V.
|
| 卷 17, 编号 1 (2023) |
Increasing efficiency and safety of operation of underground tunnel escalators. The software architecture |
|
|
Popov V., Elantsev V.
|
| 卷 15, 编号 1 (2021) |
Improving the efficiency and safety of operation of underground tunnel escalators. Forecasting model |
(Rus)
|
|
Popov V., Yelantsev V.
|
| 卷 15, 编号 3 (2021) |
Increasing the efficiency and safety of operation of underground tunnel escalators. Management of risks |
(Rus)
|
|
Popov V., Yelantsev V.
|
| 卷 11, 编号 1 (2017) |
Increasing the efficiency of the catalytic converter |
(Rus)
|
|
Solomin V., Shabanov A., Shabanov A., Kiliushnik V., Mladenskiy A.
|
| 卷 7, 编号 4-2 (2013) |
Improving the efficiency of calculation of gear trains and worm drives |
(Rus)
|
|
Lukyanov A., Starikov A.
|
| 卷 15, 编号 2 (2021) |
The issue of improving the efficiency of nitrogen oxide neutralization systems in diesel internal combustion engines |
(Rus)
|
|
Shabanov A., Kondratiev D., Vanin V., Dunin A.
|
| 601 - 700 的 2506 信息 |
<< < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 > >> |
